- Jul 20, 2004
- 355
- 10
- 3,018
PRODUCT INTRO: Urethane bushing for steering rack. Best handling material.
PARTS DESCRIPTION: Steering rack bushing made to last longer and hold steadier than original parts. Handling like new car until it is worn out. Take corner and fast straight road in a steadier way.
PARTS SUITABLE FOR: waja, wira, putra, satria, gen 2, evo 1-4
Dealing method : COD or Pos/Courier everywhere in
Malaysia including Sabah,Sarawak,Brunei and
Singapore.
Revbros Performance Sells original parts by:
AEM
RC Engineering
Super Pro BUshing
Ultra Racing
RaceTech
ARP
and many more.
Serious Buyer Please Call/ Email us @ [email protected]
Contact: 012 752 1980. Please whatsapp/sms if call can't get through. (Rev)
Many vehicle manufacturers use rubber-mounting systems for their steering rack and pinions. There are many reasons for this, however the main include reduction in road shock and transfer of road noise, while providing some tolerance for misalignment of location mounts.
SuperPro have produced a number of cost effective rack mounts to overcome this situation and to provide positive location of the rack with no deterioration of the mounting material. Polyurethane is not effected by mineral oils, ultra-violet light, acids and most chemicals. Replacement of rack mounts with polyurethane ensures that all steering movements will be communicated to the steering road wheels without loss of motion or transfer of road shock and noise, vibration and harshness (NVH).
As the vehicles age, leakage of lubricating oils and the effect of ultraviolet light cause the original mounts to degrade. The end results of this is movement of the rack in its mounting location causing the vehicle to wander, introducing instability and change in the rolling toe. While these are obviously critical problems, replacement mountings are traditionally expensive or no longer exist in original equipment catalogues.
PARTS DESCRIPTION: Steering rack bushing made to last longer and hold steadier than original parts. Handling like new car until it is worn out. Take corner and fast straight road in a steadier way.
PARTS SUITABLE FOR: waja, wira, putra, satria, gen 2, evo 1-4
Dealing method : COD or Pos/Courier everywhere in
Malaysia including Sabah,Sarawak,Brunei and
Singapore.
Revbros Performance Sells original parts by:
AEM
RC Engineering
Super Pro BUshing
Ultra Racing
RaceTech
ARP
and many more.
Serious Buyer Please Call/ Email us @ [email protected]
Contact: 012 752 1980. Please whatsapp/sms if call can't get through. (Rev)
Many vehicle manufacturers use rubber-mounting systems for their steering rack and pinions. There are many reasons for this, however the main include reduction in road shock and transfer of road noise, while providing some tolerance for misalignment of location mounts.
SuperPro have produced a number of cost effective rack mounts to overcome this situation and to provide positive location of the rack with no deterioration of the mounting material. Polyurethane is not effected by mineral oils, ultra-violet light, acids and most chemicals. Replacement of rack mounts with polyurethane ensures that all steering movements will be communicated to the steering road wheels without loss of motion or transfer of road shock and noise, vibration and harshness (NVH).
As the vehicles age, leakage of lubricating oils and the effect of ultraviolet light cause the original mounts to degrade. The end results of this is movement of the rack in its mounting location causing the vehicle to wander, introducing instability and change in the rolling toe. While these are obviously critical problems, replacement mountings are traditionally expensive or no longer exist in original equipment catalogues.
Attachments
Last edited:
