Sidebar

@{SASUKE}@ Fujitsubo Super Ti exhaust system for 350Z

Status
Not open for further replies.
Engine and Performance

@{SASUKE}@ Fujitsubo Super Ti exhaust system for 350Z

S

sasuke

Over 10,000 RPM!
Senior Member
Nov 23, 2004
19,442
3
3,138
I have one set used Fujitsubo Super Ti catback exhaust system for Nissan Fairlady 350Z (Z33) for sale. Condition is tip top, got very minor dent at middle pipe as in the picture.
The Super Ti is the top performance exhaust offered by Fujitsubo. The Fujitsubo Super Ti catback exhaust features full titanium exhaust piping and muffler. As a result, the Fujitsubo Super Ti exhaust is both light weight and extra strong, enhancing performance and durability. At idle, the Fujitsubo Super Ti noise level is approximately 72dB. At 4800 RPM, the Fujitsubo Legalis-R noise level is approximately 94dB. The pipe size is 76.3mm. The Super Ti weight is 11.6kg and original set is 20.4kg.
Please refer to Fujitsubo official website for more information.
If interested please call me to deal. Thanks.

ITEM SOLD!!!
 

Attachments

Last edited:
Status
Not open for further replies.
Similar threads   Forum
@{SASUKE}@ PIONEER Carrozzeria TS-C017A Component Speakers Set ICE -In Car Entertainment
[WTS] @{SASUKE}@ TEIN Super Wagon with EDFC for Stream RN6 Chassis and Wheels
@{SASUKE}@ Ganador Super Mirror Subaru Impreza GDB #2 Exterior and Body
[WTS] @{SASUKE}@ HKS Hipermax Performer for GDB V9 Engine and Performance
@{SASUKE}@ Advan RG 16"x7.5J Chassis and Wheels
@{SASUKE}@ Skyline GTR R34 headlights set Exterior and Body
@{SASUKE}@ Dog Fight Pro titanium exhaust for GDB Engine and Performance
@{SASUKE}@ Sprint Hart CP-035 15" for EK9 Chassis and Wheels
@{SASUKE}@ Mugen extractor for B16B/B18C Engine and Performance
@{SASUKE}@ TEIN Type Flex for GDB Chassis and Wheels
@{SASUKE}@ Azect 18"x7J 5x114.3 +55 Chassis and Wheels
@{SASUKE}@ TE37 15"x6.5J 5x114.3 +45 Chassis and Wheels
@{SASUKE}@ Amuse exhaust manifold for S2000 AP1 Engine and Performance
@{SASUKE}@ Mugen exhaust system for DC5 TypeR Engine and Performance
@{SASUKE}@ 5Zigen 304 RO for DC5 Engine and Performance
@{SASUKE}@ Mugen rear strut bar for EK Chassis and Wheels
@{SASUKE}@ Mugen original lip for EK 99-00 Exterior and Body
@{SASUKE}@ DC2 TypeR cam with adj. cam pulley Engine and Performance
@{SASUKE}@ Jasma exhaust system for Subaru STi V8 GDB Engine and Performance
@{SASUKE}@ Fujitsubo FGK Power Getter exhaust Engine and Performance
  Similar Threads  
@{SASUKE}@ PIONEER Carrozzeria TS-C017A Component Speakers Set ICE -In Car Entertainment
[WTS] @{SASUKE}@ TEIN Super Wagon with EDFC for Stream RN6 Chassis and Wheels
@{SASUKE}@ Ganador Super Mirror Subaru Impreza GDB #2 Exterior and Body
[WTS] @{SASUKE}@ HKS Hipermax Performer for GDB V9 Engine and Performance
@{SASUKE}@ Advan RG 16"x7.5J Chassis and Wheels
@{SASUKE}@ Skyline GTR R34 headlights set Exterior and Body
@{SASUKE}@ Dog Fight Pro titanium exhaust for GDB Engine and Performance
@{SASUKE}@ Sprint Hart CP-035 15" for EK9 Chassis and Wheels
@{SASUKE}@ Mugen extractor for B16B/B18C Engine and Performance
@{SASUKE}@ TEIN Type Flex for GDB Chassis and Wheels
@{SASUKE}@ Azect 18"x7J 5x114.3 +55 Chassis and Wheels
@{SASUKE}@ TE37 15"x6.5J 5x114.3 +45 Chassis and Wheels
@{SASUKE}@ Amuse exhaust manifold for S2000 AP1 Engine and Performance
@{SASUKE}@ Mugen exhaust system for DC5 TypeR Engine and Performance
@{SASUKE}@ 5Zigen 304 RO for DC5 Engine and Performance
@{SASUKE}@ Mugen rear strut bar for EK Chassis and Wheels
@{SASUKE}@ Mugen original lip for EK 99-00 Exterior and Body
@{SASUKE}@ DC2 TypeR cam with adj. cam pulley Engine and Performance
@{SASUKE}@ Jasma exhaust system for Subaru STi V8 GDB Engine and Performance
@{SASUKE}@ Fujitsubo FGK Power Getter exhaust Engine and Performance

The Marketplace Latest

The Marketplace Top Posts

Recent Posts

Random Post Every 5 Minutes

ckdenion
Fuel Pressure Regulator setting
Guys, I'm driving a persona iafm 4AT.

installed Arospeed fuel pressure regulator few weeks ago and the setting is at 2.8bar (~40psi). after i read up, i found out that the standard pressure setting shud b around 3.5bar or so. just wanna know, at this low pressure 2.8bar, will it cause transmission lag issue? cz im facing transmission lag issue. it is like transmission slipping when gear upshifting.

first time using FPR so no experience in it.:help:
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Total: 854 (members: 0, guests: 854)

Enjoying Zerotohundred?

Log-in for an ad-less experience