install Pivot Speedmeter or Apexi RSMHi Sifu sifu... need an advise
Currently using stock ecu with safc.. with stock ecu cms the prob of speed limit.. any idea what to do..
install Pivot Speedmeter or Apexi RSMHi Sifu sifu... need an advise
Currently using stock ecu with safc.. with stock ecu cms the prob of speed limit.. any idea what to do..
speed limit? wow.. what speed you are on..Hi Sifu sifu... need an advise
Currently using stock ecu with safc.. with stock ecu cms the prob of speed limit.. any idea what to do..
2-step? tyre not spinning at 4k rpm?speed limit? wow.. what speed you are on..
another cheap way that I know, is to modify the chip in current ecu.
I saw a few that are doing this.
my current ecu also modified, no speed cut, launch at 4000rpm
what is 2 step?2-step? tyre not spinning at 4k rpm?
your ecu is rechip or?what is 2 step?
initial, tyre do spin..
like fast & furious
but after time, you know how to control, is still ok.. just controlling of clutch, slowly release
perdana chassis is quite heavy, not easy to spin..
I'm also using Potenza 002, 225/45/17
mine is a rechip, modify the main chip if I got it correct.your ecu is rechip or?
2-step is 2 different rev limiter, usuallly to build boost during launch.
i've seen perdana tyre spin through out 150-ish meter during drag day..even my manual last time spin out during launch.
where do you purchase your rechip? chop shop?mine is a rechip, modify the main chip if I got it correct.
Anyway I don't drag or race.. so to me, its overkill..
I only got it because my older ecu is damage, cannot control the boost.
When I boost, my wife will scold me..
anyway my driving habit also gentle..
I slowly release while in 1.5 - 2k rpm..
family car..
safety come first..
I got it from my mechanic, if I recall correctly, there's this guy who does such stuff in KL.where do you purchase your rechip? chop shop?
Looking for rechip to replace stock ecu..
My friend gave me a unit called speed limit defencer, but in the end did not install it as seldom hit until that speed.....Hi Sifu sifu... need an advise
Currently using stock ecu with safc.. with stock ecu cms the prob of speed limit.. any idea what to do..
tested so far 210.. perhaps around 240?250-ishNot sure if this guy can solve your problem.
Anyway what is the top speed for evo engine?
syiok la...180 rpm only around 4.5k rpm..180 already 5k+me 180 only
Slightly over 4k rpm only means can still go.......me 180 only
jb, there's this shop that specialize in unichip.I saw an add a guy Unchip and got lauch control for this V6TT... really got such thing? Any contact of the mechanic that modify ur ecu?
ball of steel..me 180 only
Yo Bro, what contact u need?HI kurt any contact no.. wanna make appointment