Nissan GT-R

sakuraguy

5,000 RPM
Senior Member
Nov 4, 2004
5,834
27
3,148
Sendai, JAPAN.
www.zerotohundred.com







Best Car magazine in Japan is showing off a couple of pictures of the upcoming GT-R and reporting some interesting stuff. They claim:

"The standard GTR is expected to start at $57K while the V Spec and EVO Spec will start at $67K and $94K respectivly. Both a 6 speed and an advanced paddle shifting automatic are to be available. The Standard GTR and Spec V will be equiped with a 480HP version of the VQHRTT engine(displacement is either 3.7 or 3.8L as it has not yet been confirmed).

The GTR EVO will receive a 530HP version of the VQHRTT engine as well as being roughly 220lbs lighter then the standard GTR, coming with light weight seats, a larger more aerodynamic rear spoiler, large ceramic brake rotors, and a revised Altessa AWD geared for more track use."

However, I tend to not takes these news and images from Japanese magazines very seriously. They aren't usually very accurate at all. Click on the images for larger picture.
 
Last edited:

imoloq

1,000 RPM
Senior Member
Nov 1, 2005
1,069
25
1,648
Advanced paddle-shifting automatic? Hope it's not as bad as the one in auto GTTs.
 

Carb0n

Junior Member
Senior Member
Dec 21, 2006
14
0
1,501
what is the torque like? around 800Nm? zth at 3.7 sec, that is mad.
 

Alchemis

1,000 RPM
Senior Member
Dec 13, 2005
1,416
47
1,648
the power of 280 ps is already lifted about a year ago...
no more 280 gentlemen agreement...
 

cb70

Known Member
Senior Member
Jun 14, 2005
262
0
1,516
Serdang
The engine is v6 not straight 6? Straight 6 is more powerful than v6 rite in terms of torque?
 

si|verfish

5,000 RPM
Senior Member
Apr 28, 2004
5,797
0
3,136
PJ
Erm...I don't think there is any definite rule which states that a straight 6 has naturally more torque than a V6.

The benefits on a straight 6 is that it is naturally balanced and is simpler than a V configuration 6. The downside is that it is long and that's where the V6 comes in being more compact but has the drawback of being more complex.
 

Random Post Every 5 Minutes

i just open up my e4 engine today..... looks like luck always not by my side..... my block being scratch by the piston, make the engine damaged, even got suspected head lifting cause we open the head so easy, not tight at all..... i got 1 RVR engine, terbalik type, it looks similar to my e4 engine, i plan to use that engine, my problem is

- i know the rvr different from e4 engine in turbo, injector, valve cover colour,ecu and wiring, and also intake.... what more different?? can anyone...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience