94 - 95 Mitsubishi Lancer Mivec ECU Upgrade chip!!!
This is a performance ECU Upgrade for the Mitsubishi Lancer MIVEC. Turn your Mitsubishi into a MITSU!!
This is tuned for a car with a free flowing exhaust and intake.
Features:
- Performance Tuned Fuel and Ignition Curves
- Removal of the Speedcut
- Rev Limiter Raised to 8500 rpm
- Adjusted idle
Recommended:
- Upgraded intake
- Upgraded exhaust
- 95-97 octane petrol
Supplied:
- Performance tuned EPROM chip
- Installation socket
Required:
- 7035 EPROM ECU (please check that you have an EPROM ECU prior to purchase)
This chip focuses on midrange power. You will feel noticeable differences from stock in the midrange. The rev limit has been bumped, but remains safe. Of course, the speed cut has been disabled. The MIVEC kickpoint remains at 5200 rpm (I feel this is optimal), but that can be altered with a MIVEC controller.
Installation instructions available.
****SHIPPING and Conditions ****
I hold no responsibility if lost or damaged through post however, it will be bubble wrapped for protection.
****Thanks for Looking****
nice item ..... recomended for mivec 1.6 manual users !
for transplant engine put this mivec chip n get horsepower increase and torque also increased !
car feels light and powefull ........
this modification best for starters n option for install piggy back also u can feel the difference compared to the stock chip !
ECU 4828 or 7305 also can install .............. means new n old mivec 1.6 Gen1 also can install !
nice chip and no speed cut no more wen u reach 180km/h fuel supply cut n car cannot go further !
fully satisfied and will recommend this chip to all .............. cheers !
MIVEC Ralliart Chip (copy) - selling at RM$200.00
included a chip socket for plug n play , pos laju express 2-3 days reach your door.
0126683386
Thanks.
This is a performance ECU Upgrade for the Mitsubishi Lancer MIVEC. Turn your Mitsubishi into a MITSU!!
This is tuned for a car with a free flowing exhaust and intake.
Features:
- Performance Tuned Fuel and Ignition Curves
- Removal of the Speedcut
- Rev Limiter Raised to 8500 rpm
- Adjusted idle
Recommended:
- Upgraded intake
- Upgraded exhaust
- 95-97 octane petrol
Supplied:
- Performance tuned EPROM chip
- Installation socket
Required:
- 7035 EPROM ECU (please check that you have an EPROM ECU prior to purchase)
This chip focuses on midrange power. You will feel noticeable differences from stock in the midrange. The rev limit has been bumped, but remains safe. Of course, the speed cut has been disabled. The MIVEC kickpoint remains at 5200 rpm (I feel this is optimal), but that can be altered with a MIVEC controller.
Installation instructions available.
****SHIPPING and Conditions ****
I hold no responsibility if lost or damaged through post however, it will be bubble wrapped for protection.
****Thanks for Looking****
nice item ..... recomended for mivec 1.6 manual users !
for transplant engine put this mivec chip n get horsepower increase and torque also increased !
car feels light and powefull ........
this modification best for starters n option for install piggy back also u can feel the difference compared to the stock chip !
ECU 4828 or 7305 also can install .............. means new n old mivec 1.6 Gen1 also can install !
nice chip and no speed cut no more wen u reach 180km/h fuel supply cut n car cannot go further !
fully satisfied and will recommend this chip to all .............. cheers !
MIVEC Ralliart Chip (copy) - selling at RM$200.00
included a chip socket for plug n play , pos laju express 2-3 days reach your door.
0126683386
Thanks.
