mirror auto fold

sunnyray

Known Member
Senior Member
Joined
Mar 21, 2005
Messages
92
Points
3,006
Location
singapore
anyone noe how to link our auto mirror to our alarm???when we arm our wheels alarm it will auto fold to close n when disarm the alarm it will reopen tat kind of DIY anyone???
 
u have to see if ur alarm has got an "output when armed" signal or not. If have, then just tap this wire and by using a relay, hock it up to the mirror button...
 
trex92 said:
u have to see if ur alarm has got an "output when armed" signal or not. If have, then just tap this wire and by using a relay, hock it up to the mirror button...
hi bro trex92 thks for the reply.
yes my alarm do hav output when alarm.but when i do a check on the mirror sw i got a little problem.let me explain slowly.
i check thr's a live +12v constant n a -GND
den 2 wire tat hav no +V when the mirror is either close or open,but when i fold the mirror 1 of the wire will hav +12v so i just try it wif a direct +12v to it my fuse blow.i do not noe why like tat.
hav u done urs bro?if yes can show me some tip on it?thks bro.
 
hmmm... i think u refer to http://www.autoworld.com.my/photoalbum/listPhoto.asp?AId=3294&MID=drexchan&action=searchPhoto&option=albumname&txtsearch=MMC

i am not entirely sure how to wire the relay coz i dunno how the switch to fold the mirror goes. Try asking drexchan, he is also a zth forummer and the above is compliments from him... ;)
 
trex92 said:
hmmm... i think u refer to http://www.autoworld.com.my/photoalbum/listPhoto.asp?AId=3294&MID=drexchan&action=searchPhoto&option=albumname&txtsearch=MMC

i am not entirely sure how to wire the relay coz i dunno how the switch to fold the mirror goes. Try asking drexchan, he is also a zth forummer and the above is compliments from him... ;)
hi thks bro for the reply again.ok will for wait for drexchan to reply here to me.
 
:P

yes I did the installation and wiring myself but i have forgotten the exact wiring diagram and I didn't hook it to the alarm.

Welcome.
 
drexchan said:
:P

yes I did the installation and wiring myself but i have forgotten the exact wiring diagram and I didn't hook it to the alarm.

Welcome.
hi bro drexchan thks for the reply,i'm thinking of hokoing it to my alarm cos when active my alarm my mirror will auto close.
 
sunnyray said:
hi bro drexchan thks for the reply,i'm thinking of hokoing it to my alarm cos when active my alarm my mirror will auto close.

Hmmm.... how many time you arm and disarm your car in a day?

Prepare to get a new motor fow the mirror.. :wink:
 
drexchan said:
Hmmm.... how many time you arm and disarm your car in a day?

Prepare to get a new motor fow the mirror.. :wink:
bro u mean too much of folding will spoil the motor?
 
mine was 2 years old now. and my motor still ok ;)... Maintain the grease inside the motor at least 2 to 3 month and it will give you a superb performance.
 
kruger said:
mine was 2 years old now. and my motor still ok ;)... Maintain the grease inside the motor at least 2 to 3 month and it will give you a superb performance.
thks for the advise bro
 
too.

i got a problem too...is...my car have RPM lock.means when i kick to 2k rpm...my door will lock..then the mirror will close....so...how can i do??
 
i aoiladi test...same too...because when arm is one beep....disarm is two...so when disarm...the side mirrio will beep>open beep>close....i means beep-lock...beep beep..is unlock...thanks....can you show delay pic for me...car is CRV..thanks
 
kruger means that u check ur car alarm for any output when armed signal, eg the LED lights blinks when the alarm is armed (this is the kind of output when armed signal u need). Though u can't really use the LED coz the signal is not constant unless u mod the signal for ur mirrors.
 
any sifu can provide the wiring diagram ? cos, just got a pair of side mirror & want 2 try 2 DIY.thanks in advance.
 

Similar threads

New Posts

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience