How make A33 2.0 have better top speed

Cefiromaniac

Active Member
Senior Member
Mar 28, 2006
28
1
1,503
Kuala Lumpur
Just wondering have any A33 2.0 owner have the same problem, after about 190km/h its take awhile to hit 200 km/h and below any idea how i can make go faster.

I have put a drop in K&N, Y-pipe done all 6 plugs changed, ATF and filter changed ignitors all in good condition just wondering!!!

If any sifu's have done some mods maybe can share.

Thank You:hmmmm:
 

xtremeleo

3,000 RPM
Senior Member
Oct 18, 2005
3,247
464
5,183
when its difficult to hit top end, u need more power in the higher end of the revv. its either mod ur exhaust a bit, or tune it up sir
 

Cefiromaniac

Active Member
Senior Member
Thread starter
Mar 28, 2006
28
1
1,503
Kuala Lumpur
tunning up that's sounds good but where can i find a place to do it bro
 

sb3

1,000 RPM
Senior Member
Apr 22, 2005
1,141
14
5,138
Install a mild piggy back ie; SAFC from Apexi. If you tune it right, easily you can hit 210km/h !
 

Cefiromaniac

Active Member
Senior Member
Thread starter
Mar 28, 2006
28
1
1,503
Kuala Lumpur
:biggrin:Thanks bro will get in touch when i am going to do that cheers mate
 

Praba8848

Active Member
Senior Member
Jan 20, 2010
35
1
1,508
Penang
Just wondering have any A33 2.0 owner have the same problem, after about 190km/h its take awhile to hit 200 km/h and below any idea how i can make go faster.

I have put a drop in K&N, Y-pipe done all 6 plugs changed, ATF and filter changed ignitors all in good condition just wondering!!!

If any sifu's have done some mods maybe can share.

Thank You:hmmmm:
How did you do the Y pipe...can you pls give me more description on it...tks
 

Random Post Every 5 Minutes

I'm thinking to DIY an ICE Cap, I have plenty of capacitor on hand, ranging from 47uF to 10,000uF. Total 65 pcs, 9 different types of capacitor, all rated at 16V and 85deg Celcius. Bought it to DIY stun gun but in the end, project failed...

The total capacity is 152,110uF, i believe it should be big enof for an ICE cap... using 20A fuse.

The finish product should be connected directly to the amp? (paralle with amp)? any things that I have to take note?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience