Corner Weight is it a must for track purpose?

Sil80-13

1,000 RPM
Senior Member
Mar 15, 2009
1,215
44
1,648
Hi guys,

Just wondering when we tracking at Sepang, is it a must to do corner weight?

Does it help & how does it works?

Where I can send my car to do the "corner weight"?
 

stupidcar

5,000 RPM
Mar 18, 2013
5,567
850
713
Kuala Lumpur
I recently watched a video by GTchannel by KW.
Its good because if u are a heavy man, u can counter balance it.
Imagine all set up the same weight, u sat on it and the right side became heavier.
So it upsets the whole geometry.
 

leonl

Known Member
Senior Member
Aug 16, 2009
229
81
1,528
USA
A MUST for track purpose car. A well balanced race car is more predictable. An additional 100 pounds on one side of the car does make a lot of different on the track. Try swinging a 100 pound weight side to side.
 

Sil80-13

1,000 RPM
Senior Member
Thread starter
Mar 15, 2009
1,215
44
1,648
Where can I do the corner weight in Sunway?

1. How much does it cost?
2. How long it takes?
3. What they will do in corner weight?
 

mADmAN

Senior Member
Senior Member
Aug 5, 2004
1,840
547
3,213
if not mistaken craft motorsports can do corner weighting in sunway
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
RCS and Ftuned also have the corner weight service
 

Sil80-13

1,000 RPM
Senior Member
Thread starter
Mar 15, 2009
1,215
44
1,648
Roughly how much they charge for & normally how long it takes to do it?
 

Sil80-13

1,000 RPM
Senior Member
Thread starter
Mar 15, 2009
1,215
44
1,648
what will they do to ur car for rm300?

move ur fuel tank? relocate battery? or just adjust ur suspension?
I did not ask in details but I think should be adjust the suspension only to balance the corner weight.

He said need about half-day to do it...
 

kayour

Known Member
Senior Member
Apr 5, 2006
326
41
1,528
are they using special equipment or tool to do it??
 

Sil80-13

1,000 RPM
Senior Member
Thread starter
Mar 15, 2009
1,215
44
1,648
they need something like this..

car weight scale..


Yup. This is the tools that they are using.

Kegani from Puchong also provide this service.

RM400 including alighment & wheel balancing.
 

The Marketplace Top Posts

Random Post Every 5 Minutes

Hi all,

i just changed my absorber all 4 for my corolla ae101.
the weird part is that before i change the absorbers, front part got around 1.5 fingers gap
behind around 1 finger gap.

after i change absorber(just to clarify, its new), the front driver side 0.5 finger and passenger side remain 1.5 fingers.

the behind driver side 0.5 finger and passenger side become 1.5 finger.

i was told its possibly the spring, but i wonder, how come before change no problem now problem come...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience