Carbonrevo Custom Laminate Carbon Fiber Interior Parts

[CarbonRevo]

Hi Members,

CarbonRevo was established in 2006 as manufacturing specialising designs and manufactures innovative and creative products in carbon fiber. Our product line focuses primarily on carbon fiber products designed specifically for your vehicle for a perfect fit.

Each of our product is manufactured with high quality and high standards and inspected by our quality control team before leaving the factory. These products are made with 100% hand-laid Grade "A" carbon fibers and are finished with a high quality clear coat with UV protection.

CarbonRevo products are known for its high quality, great fitment, lightweight, and show quality finish. We can take your idea through design, prototyping and produce large or small batches delivered to your door. Interested please contact us at [email protected]

Beside Carbon Fiber Hoods, we do provide services for layminate the interior parts for varity kind of cars.We are able to customize any parts of any model of car . All products are 100% hand-made and are scratch and perfume resistant.There is also a range of layes to choose from to give your car that trendy, sporty and elegant look.All products come with warranty and quality assurance.

Discounted Standard Packages for interior panel laminations are available for most cars.

CarbonRevo - Interior CF Product for as below car model.

BMW Interior Parts Lamination Price

01) BMW 3 Series RM9xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
02) BMW 5 Series RM14xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
03) BMW 7 Series RM19xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)

HONDA Interior Parts Lamination Price
01) Accord 04 RM9xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
02) Civic FD RM 10xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
03) Jazz RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)

MITSUBISHI Interior Parts Lamination Price
01) EVO 7/8/9/X RM11xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
02) LANCER GT2.0 RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)

MAZDA Interior Parts Lamination Price
01) RX 8 RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
02) MAZDA 3 RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
03) MAZDA 6 RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)

NISSAN Interior Parts Lamination Price
01) SKYLINE GTR34 RM19xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
02) SILVIA S15 RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
03) FAIRLADY 350Z RM19xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)

Proton Interior Parts Lamination Price
01) WIRA RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
02) GEN2 RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
03) WAJA RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
04) PERDANA RM8xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
05) PERSONA RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)


TOYOTA Interior Parts Lamination Price
01) VIOS RM5xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
02) VIOS (NEW) RM8xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)
03) CALDINA RM7xx.00 (Toray Carbon Fabric [Spec: 229GSM- 3K-Twill ] from Japan)

IF YOU CAN'T FIND YOUR MODEL HERE, PLEASE PM OR EMAIL ME FOR THE INFORMATION.



All price can be negotiable and quality assurance.

If interested, please PM or email me for more information.

Thanks!

CarbonRevo

Following is the sample picture of our lamination product and process.

p/s:

 

[laut]

the price is installation for which parts
if interior,which is it
thanks

 

[CarbonRevo]

the price is installation for which parts
if interior,which is it
thanks

Hi there,

thanks for interested, it is depend the model of your car, example BMW there is 8 parts for E46. Gear Console, Front Side Handle, Back Side handle, Dashboard Side Console and the 2x small compartment cover.

Thanks!

CarbonRevo

 

[chriskhaw]

Just a question...this is carbon layering correct?

 

[CarbonRevo]

Just a question...this is carbon layering correct?

Hi there,

you are right, there is another layer Carbon fabric on top of your original parts.

Thanks!

 

[kenzo]

bro, if just the 4 doors for gen2 and gear console how much? but before this i paint those interior already, thanks!

 

[eclips3]

how bout myvi/passo 4 door panel? just the plastic panel with the power window switch. i hope u know which i meant. pls quote/pm me the price, your location and how many days i need for installation.

 

[wildchild]

Hello. I've sent you an email. Pls check.

 

[CarbonRevo]

bro, if just the 4 doors for gen2 and gear console how much? but before this i paint those interior already, thanks!

The cost for each panel will be RM250.00 and the gear console will be RM200.00

 

[CarbonRevo]

how bout myvi/passo 4 door panel? just the plastic panel with the power window switch. i hope u know which i meant. pls quote/pm me the price, your location and how many days i need for installation.

I know what you mean is it right...

For 4pcs of this COST you RM 380.00 not including postage...

Thanks!

 

[wildchild]

Hello. Can you fix or repair carbon fiber material? I have i stuff need to repair. Could you give your phone number? Its easy discuss on the phone, coz i have many goods to laminate carbon fiber.

 

[eclips3]

yah yah, but my front 2 panels are passo ones with the cup holder which is not the same as the 2 front u posted. that is why i ask if u do wrap existing ones.

 

[ja50n]

Is it available for satria neo ? Do we have to take out our parts and pass it to u, or u will kau tim everything ? how long will it take ??

 

[ja50n]

oh ya, and also, if u laminate on the existing stuff. will it be too thick after the lamination and cant fit in the place ??

 

[CarbonRevo]

oh ya, and also, if u laminate on the existing stuff. will it be too thick after the lamination and cant fit in the place ??

just have a look at the thickness of the Myvi Side Armest Panel, it is so thin only ....