A32

[Gandalf]

Anyone knows of any feilo being sold with the transplanted 2.5 litre engine? Nowadays I check on the Star paper hor, most 97 batch feilo are less than RM50k. Most are RM46k ++. How much lower do you think can bargain ar?

Actually plan is like this. Buy a 3.0 feilo. Saje want to feel power of award winning 3.0 litre engine. Paling maximum also for one year la cos road tax issue. (if kaya liao then nvm). After which I intend to transplant the lower cc engine.

Aspire to have Yakuza fatty boy.

Advice welcome.

 

[cgui]

gandalf. u should ask ongteckweng. he has transplant his fatty with a VQ25 engine. there was 1 2.5L fatty but i'm not sure whether is a A32 or A31. previously was posted in motor trader sometime back. there was even another unit, comfirm A32 being sold in autoworld. try finding it out. dunno still there or not. i'm also planning to convert ... if got $$$ lar. damn expensive man. RM2115 peryear road tax. can pay for insurance & road tax for 2.5L.

 

[peter liew]

Bodykit

hi guy peter liew here, anybody here can help me to find up the rear tail lamp and bumber for a33 (the plate no. in the bonnet center coz my one is a32).
about the modification on my cefiro 3.0 to 2.5 cost arround rm2xxx including jpj runner fees,labour,oil,engine(trade in the 3.0)etc.if you interested pls left the H/P number,i give you the number:OK.

 

[ongteckweng]

wah peter...so cheap ahh? i bought the halfcut also like 5k++. not including the workmanship etc!!! wher u get them la??
2.5l road tax around 800++...so can save 1300++
anyway, FC around the same lor. if not heavy footing, can get 16cts/km
btw gandalf, better get a 3.0 then convert urself. u might never know if a converted 1 have any probs. save u the headache. can get a 96 or 97 for less then 44k...no prob...trust me...hehehe

 

[Gandalf]

Wah.. liddat beh tahan liao. Must shift to high gear to hunt for feilo.

 

[cgui]

hey peter... RM2xxx is damn cheap man. where did u get it done? mind giving me to contact number. my HP is 012 3096037. any other nice things that the workshop can do for a feilou?

 

[ongteckweng]

thats what i say...its bloody cheap!!!!
izzit only engine+gearbox+wiring? market price also cant get le...hehehe
grab it guys!!! save a lot on Roadtax...hahahaha

 

[dream.tent]

Ong is right, look for on good A32. Shouldn't cost alot now. then drag and drop the VQ25..then zoom zoom away! And you so lucky can get cheap tranplant somemore!!
Slup slup...maybe be one day I'll change too....when I'm too poor for my roadtax.

hi guy peter liew here, anybody here can help me to find up the rear tail lamp and bumber for a33 (the plate no. in the bonnet center coz my one is a32).
about the modification on my cefiro 3.0 to 2.5 cost arround rm2xxx including jpj runner fees,labour,oil,engine(trade in the 3.0)etc.if you interested pls left the H/P number,i give you the number:OK.

 

[Lawcc]

about the modification on my cefiro 3.0 to 2.5 cost arround rm2xxx including jpj runner fees,labour,oil,engine(trade in the 3.0)etc.if you interested pls left the H/P number,i give you the number:OK.

Very interested in this, RM2xxx get back the return within 2 years, some more petrol consumption better. Please give me the contact no, Mine is 012-3953839

 

[ongteckweng]

very seldom c this peter online 1...hehehe

 

[cgui]

its consider very cheap at RM2xxx. Where can u find that price out in the market man? Totally impossible. i dun quite understand how that guy can charge so low. unless the VQ30 engine has a high price to it.

if got $$ , i'll definately do the conversion. at least can save up to RM1200 on road tax. with that can change other stuff on our feilou. hhhmmmm should consider ...

hey guys... just wanna ask u all...
today when i was driving in the rain & my fuel was almost empty. so i went to the nearest petrol station to fill up. u all know lar .. now petrol station need to turn off engine mah... so after filling my baby up, i can't seem to get her started..... i tried cranking & cranking her .. but fail. so wat i did was ... i step on the gas pedal for a few times .. & tried cranking again ... initially it gave a very weak start .. not the normal start kinda sound.. & the engine didn't came fully alive .... then i try again ... & again .. & it finally came ALIVE!... i was damn relieve..... then i rev my engine till rpm 5k to ensure everything was OK.

.. almost called a mechanic to come over. & its already 7:30pm....
then when i went to my next stop ... after turning off the engine (i was damn scare that it will not start again as i was at sg. wang) ... i try starting it again .. & again ... the engine was able to start .. but i find the sound is different .... dunno wat will happen tomoro morning ...

so .. any of u guys have tried this b4? hope u guys can help me out .... i'm planning to send my baby to Autochild Sdn Bhd in Glenmarie .. hear they got preventive maintenance service ... they will check alot of stuff for our baby ...

now having worries that by baby won't start ...

so

 

[ongteckweng]

i can recommend a good mech for u if u want. hes a supervisor at TCJIpoh. and he does part time at his own home. very experience with feilos...and consider reasonable. my car has been serviced by him for the past 9 yrs. (7 yrs in TC n 2 yrs in his home)
he knows whats wrong in just seconds!!!
give me a ring if u want his contact. thanks...

 

[Lawcc]

its consider very cheap at RM2xxx. Where can u find that price out in the market man? Totally impossible. i dun quite understand how that guy can charge so low. unless the VQ30 engine has a high price to it.

if got $$ , i'll definately do the conversion. at least can save up to RM1200 on road tax. with that can change other stuff on our feilou. hhhmmmm should consider ...

Yes, is possible, with trade in of our 3.0 engine, but according to the guy which the shop is in SS2, now the chop shop has too many VQ30 already, not keen to trade in any more.

now having worries that by baby won't start ...
so

I have this experience few times (dont know whether same symthom). Just to adjust the gearbox (which not properly align to P).

 

[Lawcc]

give me a ring if u want his contact. thanks...

Can give me the contact, I m interested leh...

 

[cgui]

Thanks Ong for the advice. mind giving me the contact. I know some ppl at TCEAS but I haven't send my baby over there yet. Plz let me know wat his phone number is. thanks.

 

[Lawcc]

Ong

Mind to share how much in total you spend for converting 3.0 to 2.5. What about your 3.0 engine, trade in? Who is the mechanic doing this for you? any side-effect? What else does your half-cut gives you beside the engine, eg. bumper, lamp, absorber & spring? brake rotor?

 

[ongteckweng]

guys...check ur pm.

lawcc, bought the halfcut rm5k++ with bodyparts. fenders, bonnet, headlamps and bumper. installation with oil etc around rm1.5k
my fren did the stuffs. easy job. direct bolt on. no prob at all coz all using the halfcut stuffs. u can trade in ur engine+everything for 1.5k. not worth it. im sellin these loose. i have contacts so i can do it. gearbox alone can cost up to rm3k!!! hehehe
brake rotor + caliper no use coz single port. the 3.0 is twin port, better..

 

[Lawcc]

Hi Ong

You mean half-cut come with gearbox too? That is very value for money leh... what about a/c compressor? or is it the actual full front half-cut

What is the mileage for your 2.5 wagon? Which chop-shop you buy it from?

Your friend is it the one from Tan Chong? If not, can I have his contact too? Interested to convert lah...

 

[ongteckweng]

yes, it comes with everything! air-con, gearbox, dashboard etc. actual full front cut.
mine did 88,000km. pretty ok la...bought it in from my fren in Batu Caves.
give him a ring and he will look for u...0122106699 Meng. Just say u want to find A32 2.5l halfcut. leave ur contact n name and he will get back to u ASAP. thanks
happy converting...hehehe

 

[peter liew]

phone no

hi ong peter liew here, may i have your friend phone number regarding for service feilo techinician in home one?
kindly reply 012-9858377 :D
yes,ong ,i just want some advice from you about the stabelity for feilo, i just change the 4 coil spring (eibach brand) to my feilo, very good for conering and not bumbeeee,now my rear absorber got problem bit /sickness,so i want to change to gas one or half gas half oil or can adjust soft hard one??????
yes, i notice that lawcc got gathering in hartamas for feilo club????