- Jan 8, 2009
- 377
- 34
- 1,528
Bro, gonna need some help here. My car was run around 100-120km/h, sometime i can hear my exhaust got sound like fire comes out like (boop boop). Normally this happen during 3rd and 4th gear. Is it got any problem?
Ya, sound very cool, can used to BBQ next time, hehehe:-)Just burning off excess fuel. Fire = cool.
Thanks bro for your info Btw bro, how he solved the fire problem? By changing the timing belt? If yes, I'll do that straight away for my next service.NNB...mine too. It could be the timing retard. I got mine fixed...well, reduced sort of.
I mentioned about it here:
What have I done?: Second Service
NNB, he just adjusted the timing using the strobe light and a screw driver hahahahahaha...but no, u don't need to change the belt. However, he did say that over time the belt will expand and even if it expands a little bit, it will affect the timing.Ya, sound very cool, can used to BBQ next time, hehehe:-)
---------- Post added at 09:19 AM ---------- 6 hour anti-bump limit - Previous post was at 09:16 AM ----------
Thanks bro for your info Btw bro, how he solved the fire problem? By changing the timing belt? If yes, I'll do that straight away for my next service.
Thank you so much bro Azmir!! I'll fix it for next service.NNB, he just adjusted the timing using the strobe light and a screw driver hahahahahaha...but no, u don't need to change the belt. However, he did say that over time the belt will expand and even if it expands a little bit, it will affect the timing.
hope that helps.
You got the same problem like me?Sounds like trouble to me...
hehehehe.. i like that quote!!!! do get a mech opinion. or meet up with some skyline junkies for opinion..Sounds like trouble to me...
Boost not reading on MDF? I have that problem too. On a cold start, sometimes the MFD doesn't read the boost. After driving for a while, it will read again.Bro, sometime when start the engine, the "turbo" display on the mfd not working even u rev it, then will hear some rattling sound at turbo side. Anyway, after have some run, the "turbo" will recover to work and sound disappear. One more thing is, what figure is a normal fuel press is?
97 or 99? Only 95 or 97 RON here in the Klang Valley.what about fuel problem? u guys using 97 or 99?