Braking issue

lukel95

Known Member
Dec 6, 2016
75
0
6
29
GB birmigham
Hi guys, recently if i full lock to the left and then brake whilst reversing my brakes make a very loud sort of trumpet sound, any ideas?

Sent from my SM-G935F using Tapatalk
 

crazykatak

500 RPM
Senior Member
Mar 1, 2006
776
48
1,528
Subang Jaya
might indicate a jammed brake piston or uneven rotor.
working the rear piston is such a hassle and takes alot of patience lol.
from your description, it sounds like it is not releasing fully or releasing too slow.
i had the same thing about 9 years ago..right after that, I found out that the rear brake was going to be jammed (after changing new pads).

try looking at 2 areas:

1. Rear brake caliper assy (pin, piston, pads, cables); check out the condition.
2. Rear brake rotors (uneven wear , warped)

good luck
 

lukel95

Known Member
Thread starter
Dec 6, 2016
75
0
6
29
GB birmigham
might indicate a jammed brake piston or uneven rotor.
working the rear piston is such a hassle and takes alot of patience lol.
from your description, it sounds like it is not releasing fully or releasing too slow.
i had the same thing about 9 years ago..right after that, I found out that the rear brake was going to be jammed (after changing new pads).

try looking at 2 areas:

1. Rear brake caliper assy (pin, piston, pads, cables); check out the condition.
2. Rear brake rotors (uneven wear , warped)

good luck
Okay great thank you, I also hear a quiet scraping noise when I brake coming to a stop and especially going downhill the noise will continue after releasing the brake.
What should I look for in the caliper and what should I do?
Also can you tell if a rotor is warped?

Sent from my SM-G935F using Tapatalk
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Okay great thank you, I also hear a quiet scraping noise when I brake coming to a stop and especially going downhill the noise will continue after releasing the brake.
What should I look for in the caliper and what should I do?
Also can you tell if a rotor is warped?

Sent from my SM-G935F using Tapatalk
Spin the disc and see how it turns. If warp, as it spins can see it wave left and right
 

Random Post Every 5 Minutes

Just to share my 2 sen and need someone here who might be facing this problem as mine n how to troubleshoot this minor problem..

Im using a semi racing exedy clutch about 1month plus now for my proton 1.8.. Ive baught a semi racing clutch plate and semi racing disc. its not 3 pucks disc but its racing organic disc. Reason why ive pick organic disc instead of 3 pucks simply because ive faced alot of traffic everyday, n i just cant stand the jerkiness of...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience