WTS EVO 4 engine parts and other stuff

Status
Not open for further replies.
Engine and Performance

WTS EVO 4 engine parts and other stuff

kenzo

6,000 RPM
Senior Member
Evo 4 block kosong, good condition no problem at all, same bore RM1.2k

Evo 4 Turbo for sale, very2 good condition, comes with all fittings but actuator had been removed and seal, only could be use with external waste. SOLD

Evo 4 crankshaft, condition ok, SOLD

Evo 4 conrods, 1 set for SOLD/COLOR]

EVo 6 Pistons 1 set RM400

Evo 4 pistons, 1 set in very good condition RM500

Evo 4 pistons, 1 set, 1 piston got slight crack. can keep for spare. RM200

Evo 4 rocker cover and billet cover, very good condition, Black Color, with gasket seal RM400

Evo 4 anti lag exhaust valve with pipe. RM100

Evo 4 original cam pulley left 1 set RM100

Evo 4 radiatior, condition ok, just change top set cover because got leak SOLD

Evo 4 head kosong, good condition, sprayed black engine enamel, got slight crack but can put epoxy or alu; welding. SOLD

Evo 4 Oil pan SOLD

Evo 4 Water pump, good condition SOLD

Evo 4 cams 1 set RM300

Evo 4 flywheel RM400

Evo 4 crank pulley, good condition SOLD

Evo 4 Timing sensor and timing plate, good working condition RM300

Evo 4 valve spring each for RM50

Evo 4 reatainers each for RM50

Evo 4 Rocker Arm each for RM50

Evo 4 hydraulic lifters each for RM50

Evo 4 Injectors 510cc, good condition RM400

Evo 4 air-con compressor, need to rebuilt RM200

Evo 4 timing belt cover RM50

Evo 4 ECU, can test first, good condition. SOLD

Evo 4 Original Radiator hose, good condition RM50

Evo 4 oil cooler with hose 1 meter RM300

Evo 4 valve stem 1 set (2 pieces) RM50

Evo 4 thermostat and housing RM100

Evo 4 head stud original 1 set RM100

Evo 4 OEM actuator td05hr RM50

Evo 4 cam holder i think exhaust and intake 1 set SOLD

Evo 6 Complete Head very good condition with ported intake, very2 good condition, complete set with cams, valve, valve springs, retainers everything, even had grand valve it RM1200

Exedy semi-racing pressure plate, good condition RM400

1 pair of 10 inch subwoofer, not bad,no box, good condition RM100

Tial lookalike 38mm waste with new flange and pipe, good condition SOLD

Gen 2 fuel tank only, without pump and bracket. RM100

Gen 2 campro siemens ECU, working condition, can test, RM150

1 unit of gen2 rear brake caliper bracket RM100

Walbro fuel pump brand new,100% original bought from N1 Racing with receipt SOLD

Gen2 head lights with eye lids, RM50

WEBSITE

www.OverBoost Motorsports.com


Join Us On Facebook HERE!


CLICK HERE FOR CONTACT FORM


CONTACT DETAILS

E-Mail - [email protected]

Mobile - +6014-932 1108 / +6017-694 8087 / +6010-377 5401 / +6012-955 1800

MSN - [email protected]

YM - [email protected]


Location Sunway or Courier RM10


Terms & Conditions


1) Items are all BRAND NEW and in excellent condition. Unless stated otherwise.

2) Purchase at your own risk. Items sold are non-refundable, non-returnable and non-exchangeable.

3) We are not liable for any damage(s) caused to or by the products(s) after shipment.

4) Please make sure the product(s) you purchase fits/suites the make/model of choice of vehicle. However i will try my best to get info for you.

5) For COD please make sure the products(s) that you are about to purchase are in good condition.

6) We do not provide installation but i can guide you or recommend you a workshop.

Thank You


http://i40.photobucket.com/albums/e250/djkenzo7/My Items For Sale/Photo_0006-1.jpg ecu

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00106.jpg woofer

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00105-1.jpg woofer

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00107.jpg woofer

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00108.jpg woofer

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00124.jpg exedy clutch cover

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00125.jpg flywheel

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00128.jpg aircon compressor

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00130.jpg conrod

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00129.jpg left conrod is evo4

http://i40.photobucket.com/albums/e250/djkenzo7/DSC00038.jpg Evo 4 pistons and conrods

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00031.jpg
http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00032.jpg Block EVo 4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00035.jpg
http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00035.jpg
Head EVO 4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00042.jpg
http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00042.jpg Radiator OEM evo4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00042.jpg Rocker Cover EVO 4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00041.jpg Injector Evo 4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00052.jpg Timing Belt Cover

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00052.jpg cam pulley oem evo 4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00051.jpg Anti-lag valve OEM evo4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00039.jpg OEM camshaft evo 4

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00025.jpg rear gen2 caliper bracket

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00025.jpg Compressor evo 4 many types

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00045.jpg
http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00045.jpg wastegate

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00053.jpg valve springs, cam lobe cover

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00056.jpgthermostat and housing

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00056.jpg retainers

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00057.jpg head studs

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00058.jpg EGR valve and piping

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00060.jpg siemens campro ecu 2005

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00061.jpg oil cooler

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00062.jpg actuator

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00063.jpg gen2 headlights

http://i40.photobucket.com/albums/e250/djkenzo7/My car stuff/DSC00064.jpg hydraulics lifters
 

Attachments

Last edited:
Status
Not open for further replies.

Random Post Every 5 Minutes

Hi guys...

My long time plan finally has an update. There is this guy who called me up today and is willing to swap with me his manual gearbox for my auto. Tomorrow we will meet and test each others car. Then if everything is fine, will proceed ^^.

Before anything, just want to get some opinions if there is anyone who done this project before. Please share experience.

1. Is it complicated?
2. Have to change ECU?
3. What are the common problems associated with manual gearbox? For...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience