Perdana V6 Community Forum *

SatriAni

Known Member
Senior Member
May 10, 2004
141
0
3,016
Visit site

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
syahv6,
yeah u are able to do top overhaul as well.
parts rm400++, labour bout rm600, duration 5-7 days.

satriani,
yes bro, the cheapest place for perdana mods, pay him a visit, but best if u could call lan before going there.....cos the boss always bz wan...hehe...
 

levin818

1,000 RPM
Senior Member
Nov 29, 2003
1,260
321
3,183
Shah Alam
Visit site
rebuilding your ecu not recommended, better buy a halfcut ones....or better get a standalone ECU @ haltech....hehe.....
Hi Danz, I am afraid that i can't agree with that, as i have seen many cases how fragile is the h/cut ECU. Friend of mind replaced 4 ECU (toyota) in one year. All from halfcut. Spend more than RM1.8k! My previous ECU that bought from h/cut, only lasted me for 1 year. One of my customer's car stall at Gua Musang (running v6tt). After i rebuilt the ECU for him and he went back there, all his car's accessories gone!

If your ECU is built on '91~'96 (you can get it from your engine model), they are now reaching the end of its lifespan. REBUILT is the only way to fully gain back its function and reliability. However, the work quality will determine the reliability of the ECU. If you get a wrong guy to rebuilt your ECU, you may ended screwing up your ECU.

Hope this help.
 

Syahvsix

Junior Member
Sep 17, 2010
14
0
501
Penang
another question my fellow bro...if rsa mcm jerking bila tekan minyak or sometimes bila nak stop or slow down di sebabkan apa? it is becoz of gear change not smooths or dlm erti kata lain, gearbox da problem?
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
levin818,
tq for the info bro...but just wondering, how long does it take to rebuild the ecu? & how much would it costs?, halfcut ones really depends on luck also rite? at least they will give 1 week warranty......

that wat worries me, im afraid the person will screw up my ecu....

syahv6,
symthoms of gbox gonna kong, either rebuild or change to another auto gbox.
 

mkdreamervl

Known Member
Senior Member
Jul 6, 2005
327
32
1,528
PJ
SyahV6 : Imho, just tukar to manual Gbox bro, solves alot alot of ur problems, better fuel consumption + power also.

Unless u dont like manual and want to go for auto, do as Danz advice loh, Install ATF cooler + fan after u get a new auto g box. Ur gbox about to kong.

---------- Post added at 06:31 PM ---------- 6 hour anti-bump limit - Previous post was at 06:29 PM ----------

Danz : Top overhaul set spareparts shop sells 1 set ka ? any recommended brands or get mmc 1 ? 5-7 days to overhaul alamak....
 

SatriAni

Known Member
Senior Member
May 10, 2004
141
0
3,016
Visit site
another question my fellow bro...if rsa mcm jerking bila tekan minyak or sometimes bila nak stop or slow down di sebabkan apa? it is becoz of gear change not smooths or dlm erti kata lain, gearbox da problem?
Same cases like my GB, but bila tekan minyak takde, just bila slowing down or nak stop aje terasa macam jerking.. if I install the ATF, will it selamatkan my GB?
bout no budget now la.. if rebuild, how much the cost, n if change new, how much the cost?
help again guys!! :bawling:
 

kanan

500 RPM
Senior Member
Nov 12, 2005
908
52
1,528
KL
bros, any tips to know which part actually causing the smoke coming off the exhaust pipe? we got 3 normal case, valve seal leak and piston ring makan or turbo oil seal leak. all give smoke out. but how to know which one is the culprit. hmm can i use vacumm boost meter reading for checking piston ring leak? mine reads -500Hg idle & -700Hg when slowing down.
 

Syahvsix

Junior Member
Sep 17, 2010
14
0
501
Penang
Same cases like my GB, but bila tekan minyak takde, just bila slowing down or nak stop aje terasa macam jerking.. if I install the ATF, will it selamatkan my GB?
bout no budget now la.. if rebuild, how much the cost, n if change new, how much the cost?
help again guys!! :bawling:


Pernah tanya kat workshop, if rebuild or service GB lebey kurang dalam RM3.5K...sama jer kos mcm cari GB lain....headache :hmmmm:
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
of course manual GB
222 - from eterna 1.8 8.5" flywheel, longer gear ratio
232 - from eterna 2.0 9" flywheel, longer gear ratio
312 - from eterna 2wd 9" flywheel short gear ratio
332 - from eterna 4wd twin turbo, need to lock to 2wd. - short gear ratio, some comes with short shifter.

**those above are the codes of the manual gearbox.
 

Syahvsix

Junior Member
Sep 17, 2010
14
0
501
Penang
come accross below parts on internet....any comment??

Price:RM4500

engine v6 n.a
upgrade adjustable cam pulley 2 pcs
stanless steel extractor 6-2-1 hotbits
ngk power cable
fuel regulator arospeed
ecu eterna manual 2 wheel drive code 0561
gearbox eterna manual code 3xx
complete set manual fm driveshaft,gear lever,cable,pump,mounting all ori eterna.
clutch plate 6 puck 9 inch with vr4 cover(new)
 

BA5

Known Member
Senior Member
Jun 18, 2009
300
1
1,518
guys,
1-any difference using RON95 an RON97? performance differences?
2-mileage differences? and what engine oil?
3-Mineral or Semi-syn what brand?
4-Any good clutch setup for V6 manual (find it very light compared to dc5)
5-How much to re-wrap the interior leather?
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
1-any difference using RON95 an RON97? performance differences?
** yes there is much difference......im currently running on ron95, so far so good. no engine knocking sound.
2-mileage differences? and what engine oil?
** shell & castrol magnatec alot of immitations in the market, beware when choosing your oil.
3-Mineral or Semi-syn what brand?
** recomended semi syn. brand depends on your wallet.
4-Any good clutch setup for V6 manual (find it very light compared to dc5)
**go for 4 puck.
5-How much to re-wrap the interior leather?
** depends on leather quality....bout rm1.8k++ full leather.
 

SatriAni

Known Member
Senior Member
May 10, 2004
141
0
3,016
Visit site
about to ask the same question about the engine oil.. what brand n type (full or semi syn) u guys usually use for stock V6 engine?

*p/s- how do i buy the ZTH sticker?
 

Random Post Every 5 Minutes

hi guys...
juz wana share d result of my upgrade on LED lighting...



changing d led is easy, but be careful wif d dashboard panel.. bcoz is made by plastic..

from yellow to bright white...!... yippeee~~~ :biggrin:


another shot... V...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience