4g93T gsr engine rebuild, need advice

[speed2horizon]

im the pro??...y u said like that?..im not yet the pro..i wished i will become someday perhap
vr4rs use td05h-16g ma... 14g at early cylone and 1g, same with 14b (diff country diff setup)...rvr use td04hl ...this is wat i know...im not try to argue or to be sifu:hmmmm:...just share wat i know not wat i donno..and this is forum is all about ..rite? y u getting mad or something..

err... Bro... I always admire ppl with knowledge and hands on skill. U're one of them. I didn't get mad. Maybe the way my emoticons is.. Hehe...

But the VR4 auto memang runs on TD04... Anyway... Thanks for educating me... The
more I know, the more I know I don't know... An old saying... Hehe...

In fact u helped me before on the phone n PM once upon a time on my first BOT failure on my TD04L in some suggestions and rectification on my problems. If u remember me...

No hard feeling brader...

 

[bebolagalas T]

err... Bro... I always admire ppl with knowledge and hands on skill. U're one of them. I didn't get mad. Maybe the way my emoticons is.. Hehe...

But the VR4 auto memang runs on TD04... Anyway... Thanks for educating me... The
more I know, the more I know I don't know... An old saying... Hehe...

In fact u helped me before on the phone n PM once upon a time on my first BOT failure on my TD04L in some suggestions and rectification on my problems. If u remember me...

No hard feeling brader...

yeah..maybe...vr4 with auto tranny run with it..i donno..coz for me it just too small for 2L engine..should have H OR HL not just TD04....i not try too be hero here...in fact i never say u r wrong actually..i just said i never heard of it..

wah which one la u..i cant remember coz there is a lot if people call me with BOT problem..maybe if u come to my kedai i will ingat u..haha..

i just a bit panas when there is "someone" call for help then said i gave them the wrong info..WTF! put my name somemore..thank you for that.. i help them for free wat!@#@#$$...if u already used 7cm2 turbine housing..to improve ur spool then changing to 7cm2 again- wat the point??..change to smaller turbine a/r..not same a/r..

ya sure ..no hard feeling...

 

[rakesh_v6]

sabar bro sabar...ni adalah dugaan bila u jadi famous :)

i pernah gi speedspin and had a nice chat with bebolagalas T altho i x beli barang.explanation was awesome and make sense....nice place to visit..

bro maybe soon i need s256 :)

anyway thanks for u explanation the other day

 

[fscheon]

hi to all gsr'ians, i would like to enquire if any of you have a spare GSR CK Gearbox Firewall side mounting bracket for rear crossmember mounts? i have lost mine during purchasing of the engine from the previous owner, he did not provide it to me damn...hopefully there is some1 here have spare's for sale.....urgently need it as i cannot complete my transplant due to missing stuff....cannot even go to puspakom/jpj registration without the bracket >.<

 

[speed2horizon]

yeah..maybe...vr4 with auto tranny run with it..i donno..coz for me it just too small for 2L engine..should have H OR HL not just TD04....i not try too be hero here...in fact i never say u r wrong actually..i just said i never heard of it..

wah which one la u..i cant remember coz there is a lot if people call me with BOT problem..maybe if u come to my kedai i will ingat u..haha..

i just a bit panas when there is "someone" call for help then said i gave them the wrong info..WTF! put my name somemore..thank you for that.. i help them for free wat!@#@#$$...if u already used 7cm2 turbine housing..to improve ur spool then changing to 7cm2 again- wat the point??..change to smaller turbine a/r..not same a/r..

ya sure ..no hard feeling...

which was why I suggested the TD05 14B 6cm2 housing.

No worry bro if dun remember me. I'm nobody. And that time, I decided to take the risk of getting another hc unit. Worth the risk, served me 1 year + before I sold it n convert to GT2560R... Hehe...
I've spoken to u on the phone. I've meet up with tong face to face... Both of u guys also great ppl. Willing to help. But Tong is a little impatience when noon question are ask n a customer thinks he knows better than him. Haha... I've seen that when I was hanging around in
his shop.

I wonder why ppl say he lansi before eveneeting him.

BTW, my friend's VR4 with switchable gb also comes with a TD04. Don't know got H or not.

sabar bro sabar...ni adalah dugaan bila u jadi famous :)

i pernah gi speedspin and had a nice chat with bebolagalas T altho i x beli barang.explanation was awesome and make sense....nice place to visit..

bro maybe soon i need s256 :)

anyway thanks for u explanation the other day

agreed

hi to all gsr'ians, i would like to enquire if any of you have a spare GSR CK Gearbox Firewall side mounting bracket for rear crossmember mounts? i have lost mine during purchasing of the engine from the previous owner, he did not provide it to me damn...hopefully there is some1 here have spare's for sale.....urgently need it as i cannot complete my transplant due to missing stuff....cannot even go to puspakom/jpj registration without the bracket >.<

look for a runner. My friend's car was endorsed before the engine is fixed onto the engine. Can kow Tim one la...

 

[contreasjun27]

who gave u wrong info?.. google up the info...Come la bro..

---------- Post added at 11:25 PM ---------- 6 hour anti-bump limit - Previous post was at 11:20 PM ----------



wah never heard vr4 used td04 before...

---------- Post added at 11:29 PM ---------- 6 hour anti-bump limit - Previous post was at 11:25 PM ----------



7cm2 or 6cm2.. not mm...!

---------- Post added at 11:33 PM ---------- 6 hour anti-bump limit - Previous post was at 11:29 PM ----------



if 20g too big or too 'lag' for u ...dont find or even look at t4 turbo...find t3 or t2 turbo..

chill bro you are a very nice guy bro no doubt about it....
just wanna clarify the which version of VR4 is using that 6cm only...cheers bro dont get mad bro

 

[bebolagalas T]

haha..ya ya...lala..im cool sorry for the irritating behavior..haha...

 

[contreasjun27]

yeah..maybe...vr4 with auto tranny run with it..i donno..coz for me it just too small for 2L engine..should have H OR HL not just TD04....i not try too be hero here...in fact i never say u r wrong actually..i just said i never heard of it..

wah which one la u..i cant remember coz there is a lot if people call me with BOT problem..maybe if u come to my kedai i will ingat u..haha..

i just a bit panas when there is "someone" call for help then said i gave them the wrong info..WTF! put my name somemore..thank you for that.. i help them for free wat!@#@#$$...if u already used 7cm2 turbine housing..to improve ur spool then changing to 7cm2 again- wat the point??..change to smaller turbine a/r..not same a/r..

ya sure ..no hard feeling...

you have my apology bro should have put your name here haha...forgive me boss!!!

---------- Post added at 08:40 PM ---------- 6 hour anti-bump limit - Previous post was at 08:37 PM ----------

haha..ya ya...lala..im cool sorry for the irritating behavior..haha...

so mind to help me with my problem???
really hope to reduce lag but I've been finding for this VR4 RS turbine for about 2 months still cant find it bro...sob sob...

 

[bebolagalas T]

you have my apology bro should have put your name here haha...forgive me boss!!!

---------- Post added at 08:40 PM ---------- 6 hour anti-bump limit - Previous post was at 08:37 PM ----------



so mind to help me with my problem???
really hope to reduce lag but I've been finding for this VR4 RS turbine for about 2 months still cant find it bro...sob sob...

find vr4 bro..td05h with single blade fin..6cm2..the problem is the turbine housing normally crack..it hard to find without crack one..

aiyo bro..u can mention my name no problem at all...but did i gave u the wrong info? that the only matter..:hmmmm:.. dont find the rs..coz the rs use the 16g. cos rs version is 'evo 0'. before evo 1

 

[jinkl]

i have a fren running td05 on a 1.6 mirage err no issues and no lag complains so far
i guess the keyword here is TUNE. If i slap in a gt42 without tune i bet it will spool tomorrow.

 

[bebolagalas T]

i have a fren running td05 on a 1.6 mirage err no issues and no lag complains so far
i guess the keyword here is TUNE. If i slap in a gt42 without tune i bet it will spool tomorrow.

Gud point bro... Another thing is we want something..we'll lose something

 

[speed2horizon]

i have a fren running td05 on a 1.6 mirage err no issues and no lag complains so far
i guess the keyword here is TUNE. If i slap in a gt42 without tune i bet it will spool tomorrow.

Err... 1.7 hehe...

On emanage... Is that the one??

 

[contreasjun27]

i have a fren running td05 on a 1.6 mirage err no issues and no lag complains so far
i guess the keyword here is TUNE. If i slap in a gt42 without tune i bet it will spool tomorrow.

this is very true though....your friend using standalone for this setup?

 

[speed2horizon]

this is very true though....your friend using standalone for this setup?

On Emanage la....

 

[mojoloon]

Hi

Can I use back the old exhaust manifold and tumbuk a lubang for wastegate? WHy I need to pay few thounsand and customize a new one?

 

[speed2horizon]

Hi

Can I use back the old exhaust manifold and tumbuk a lubang for wastegate? WHy I need to pay few thounsand and customize a new one?

Can... Then u weld a stainless steel pipe for the wastegate... Then the burnt fluxes from the welding rods that is not being able to be removed before thinstallation came off when boosting n flow into the turbine fin n next thing u find is the fins got flatten by the fluxes n leftover welds during the welding process.

There are ways to install a wasgate explained n discussed in the wastegate explained thread... Pls read
http://www.zerotohundred.com/newfor...ydraulic-lifters-for-4g93t-7.html#post4307413

 

[Adeen]

bro s2h....the link brought me to a hydraulic lifter thread la...:D

 

[speed2horizon]

bro s2h....the link brought me to a hydraulic lifter thread la...:D

Oh shit!!! >.<"'

thanks for correcting... I was replying with phone with a 3/4 slept mind and 1/2 slept eyes...

Sorry everyone...

this I the right link:-
http://www.zerotohundred.com/newforums/tech-forced-induction/255450-wastegate-explained.html

 

[contreasjun27]

Hi

Can I use back the old exhaust manifold and tumbuk a lubang for wastegate? WHy I need to pay few thounsand and customize a new one?

now got ready made turbo header with wastegate flange very cheap and very good quality bro

 

[zedkov]

hi all sifu, wanna ask. is the turbine for d 4G93T auto differance from the manual? or just the same? thanks alot for d answer. ;)