Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="stroker_kit" data-source="post: 230178" data-attributes="member: 1595">although fish tank valve are also using the bleed method like the rest of the branded manual BC, the boost generated are totally different(but no doubt it can still increased ur boost level laaa).... using cheap fish tank valves will produce boost creep, it takes a longer time to get max boost a.k.a lag..... however, using branded BC which normally uses ball bearing pressure release valve will ensure that max boost is produced at minimum time....cos only when the required boost has been reached, only then the pressure is released to the actuator to open the wastegate....not like using fish tank valves ...it will open the wastegate slightly right from the very start at 0bar, thus producing max boost slower....this also happen to standard actuators on a standard factory boost setting.....so, u might want to think again.... rm150 for a pressure release manual boost controller is not bad for a budget maaa....provided that this Hallman's BC really is a pressure release type of manual BC... :)as for me, im using Turbosmart manual BC which are really cool compared to my old fish tank valve...it can even lower down the boost level below the standard spec.... and the max boost produced are alot faster with minimum boost spike..... brand new rm300, but i bought 2nd hand abit cheaper laaa...</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

s14 absober

hi, i would like to knw s14 asb can match s13 /s15/skyline knuckle that comes with 4pots brake set ?? hope nissan sifu to clear my question plz, thank you....

adjustable absorber for sale!!!

1 set adjustable absorber (hi lo & soft hard) for sylvia s13 or 180sx
brand:HKS hyper-D
condition:leaking!
RM1000 (nett)
(see pic)

thats all...interested???pm me!!!

sms or call:017-3149604(Faisal)
loc:usj,subang...

what is 4gauge cable?

hi everyone

what is that thing?
'4 gauge cable'

i saw on my meter manual
and also other thread..