Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kuroneko" data-source="post: 2407130" data-attributes="member: 19668">I'm running a blitz DSBC spec R (dual solenoid) and it's great. Holds boost flat all the way to redline, no spikes. Easy to install, setup, and control. Doesn't take too long to figure out how to use it too :) The main advantage of running dual solenoid is for higher boost cars. Also supposedly has faster response between the time you put your foot down, and the time it tells your actuator what to do, but don't quote me on that.Blitz got a newer model tho, the SBC i-D, which has a nice big screen with nice display. However, the scramble boost isn't so good apparently.However, the Apexi AVC-R is also another highly regarded boost controller, that only utilises a big single solenoid. It takes a bit more time to set up right, but when done, it works good as gold. Nice big blue screen (bad or good thing?) Easy to control, has nice functions like RPM specific boost, scramble boost. Also can display other stuff like rpm, speed, tps, duty cycle, boost, and the thing I like about the apexi units is how they can record the peak boost and what not (well, all the EBC's can record peak...) However, the AVC-R in general is more expensive.The Greddy profec B, I've heard many success stories on the net. But my local Jap tuner (regarded as the god of nissans in Auckland) says they have a problem with fluctuating. My friend has one on his S15, and says they are a bit tricky to setup, cause everything is done in percentages (although you can change it to point specific, but that's just as confusing :/ ). Best to setup on the dyno I reckon, save yourself the time. Also, the size of this actuator seems somewhat small... but I'm sure it works just as well as the other. This one seems to be the cheapest of the EBC's I looked at. Simple but effective perhaps?The HKS one is REAL nice. Single solenoid, with the "stepping motor" technology. I think the new EVC5 just came out this year. The EVC4 is pretty good though. Nice display, bit tricky to install/setup (the dial is a bit annoying, gotta get used to it :/, and the buttons a bit small?) . My friend has one on his S14, and all his boost dyno graphs are so smooth, and never gives problems, no spikes/creeping, nothing unexpected (to be expected from HKS). However... the price is not nice at all.... probably one of the most expensive ones out there.Price (from cheapest to most exp)Greddy Profec BBlitz DSBC-RBlitz i-DApexi AVC-RHKS EVC4HKS EVC5I don't have experience with any other boost controller sorry :( I went with the Blitz DSBC-R in the end because of it's price, and the fact that it's simple to use. All of them have overboost protection (lower your boost when you hit a certain threshold), peak boost record, a few boost settings, and some sort of scramble boost. I also liked the fact that it's discrete and small, so people looking from outside can't see it easily, like the big display on AVC-R and EVC and i-D.Err... I guess... it's really up to your budget, and preference as to which you like the look of. They all pretty much do the same thing, and have the reliability of Top quality Japanese made stuff.Hope it helps bud,Ryan</blockquote>

Verification

The Marketplace Latest

BRAND NEW original rare Yokohama ADVAN Racing RG4...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ2 RZii...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL 18x9jj offset...
- Started by david tao
- Chassis and Wheels
Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R
- Started by aycy
- Chassis and Wheels
Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...
- Started by aycy
- Exterior and Body
Honda Jazz/Fit GK Mugen body kit
- Started by jeff6126
- Exterior and Body
original TWS Taneisya P1 racing 17x8.5jj offset +28...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing CE28RT 18x9jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Carbon Fiber Airtrek Turbo Scoop

Preview..... Still unfinished. Needs polishing n finishing to complete.

after t/c my mivec

my isc motor melt already, changed last 2 weeks... now melt again..

car running on 1.6 mivec turbo, nissan eterna i/c, 1.8 turbo kit.

anyone face same problem?

Blow Off Echo Sound

I seen a few cars with the BOV
going like pshhh (followed by an echo)
what bov is that ? how come the sound comes like tht
anyone can anwser me please let me know , thanks a million

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

BRAND NEW original rare Yokohama ADVAN Racing RG4...

original rare Yokohama ADVAN Racing RZ2 RZii...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Rays Volk Racing TE37SL 18x9jj offset...

Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R

Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...

Honda Jazz/Fit GK Mugen body kit

original TWS Taneisya P1 racing 17x8.5jj offset +28...

original rare Rays Volk Racing CE28RT 18x9jj offset...

Posts refresh every 5 minutes

Recent Posts

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

AMPANG mari!!ZTH member

Search

Online now

Enjoying Zerotohundred?