Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="gerard" data-source="post: 865141" data-attributes="member: 7656">Bro,Nice to hear that the engine and sc have mated well, at least in terms of elimination of lag and instant power delivery from very, very low RPM onwards..which is extremly very well suited for close quarter traffic sprinting and high torque driving with minimal gearshifts...Well, I am indeed very keen to test 1 unit of the screw type at a later stage but cost issue would be one major obstacle as majority of hardware (ie pulley and belting) also comes from the same manufacturer (imported).As our company's objective is to provide an additional choice to end users for increament of power, minus the high maintenance and the heavy burden of monetary issues involved, we will have to try our level best to keep cost involve in development work as low as possible so many, many more end users could benefit from our hard work and enjoy what you and the rest of the SCed guys enjoy...Thats the dedication Sang and I have to you guys from VOLTZ HYBRID DEVELOPMENT.Which is why stage 2 is developed and tested, to provide you guys who have install stage 1, to have more fun with stage 2 in mind....Stage 2 is all bout high torque power delivery and response, more instant power minus lag but still maintaining boost level to 0.7 bar...High horse power though is not on the agenda for stage 2.......Again new benchmarks are being set as we speak....Just like the old days, tuning sc is still a bloody nightmare, made even worst when high torque is on the agenda without increasing boost level, maintaining at 0.7 bar...but we have almost completed tuning stage 2 and it has been in development and testing for almost a 9 months with lots hard driving and crazy high speed test over period of test and fine tuning as we went along, running the engine for durability, reliabilty and stability of the new piggyback system....Been great so far....Loads of fun....On the absorber settings, it will probably take a few sessions for damping and setting changes to get what you actually want or what suites your driving style...But, at least we do get the support from manufacturer to achieve this goal....Bro, do keep in touch and we should meet up for teh tarik soon and let you test stage 2 capabilities once its completed, which is very, very soon....Been too long a time since we caught up....cheers gerard</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

still doing it

New wheels and body kit under way

R34 GTR MFD unit..

Hi all.
I have 1 unit MFD (V-spec 99) taken out from my car.
I treat this one as a spare as I bought another one recently.
This unit is in a good working condition, but the thing is, the screen have a
bit orange...

wanna meet up tonight for TCSS?

let's meet up for chit chat tonite at sunway? what do u say? about 9pm?