Roll Center Adjuster for Honda Car

[tecque]

This Roll Center Adjuster replaces the stock lower control armbushing. By increasing the height of the bushing, the control arm can now sit lower and straight with the horizontal plane allowing greater shock travel and increased stability. For a stock height normal car,the control arms are preset by the manufacturer to give optimum results. On a lowered car, these control arms are bent differently and will completely change the geometry of the vehicle and the roll center point to a far lower position from the center of gravity and is far from ideal. The result is a deteriorating cornering force from an increased body roll.. With the Roll Center Adjuster, enthusiasts can now correct the height and geometry of the lower control arms to yield optimum results again, resulting in INCREASED TRACTION AND BETTER STABILITY.

DC/EG/EK RM700
EP/ DC5 RM800 (aluminium)
FIT GD1-3 RM750
S2000 RM1300 (forged)

Call Terence Ho 012-3811137

 

[tecque]

Attached picture of car no. 95 and 65 both cars from Lochi and equipped with hardrace products (especially car 95). 65 was 2008 champion and 95 was third and suppose to be first but got into accident and fall back to behind and has to chase back to win 3rd.

 

[tecque]

HARD RUBBER VS POLYURETHANE BUSHING

A lot has been discussed about who is better, in terms of reliability, life span, performance and NVH. I personally have been using polyurethane bushing since 1998, where it is THE products to use for performance replacement bushing during our time and heavy bombing of our mindfrom the advertisement from all the sport compact related magazines. The figure below give the best description between the 2 type of bushing.
http://www.tractiondynamics.com.my/images/rubber.jpg

 

[Faceless]

bro still got stock for DC5? facelift also can fit?

the price is inclusive installation?

 

[tecque]

Bring UP pOsT>>>>>>