Mivec Turbo Demod Sale

Status
Not open for further replies.
Engine and Performance

Mivec Turbo Demod Sale

corrupt monk

Known Member
Senior Member
Joined
Mar 21, 2007
Messages
151
Points
1,518
Hi All,

I am de-modding my current ride which is a Satria Mivec Turbo 4G92. Buyer can use back your standard 1.6 or 1.8 block. Current engine setup is 1600cc Mivec Turbo - 298bhp @ 1bar / 302bhp @ 1.2bar / 310bhp @ 1.5bar. I have dyno sheets to prove.

Kindly see below for list of items and price.

*swap items to standard items frm 4G9 series i.e. 1.6 Auto GB /1.8 Putra Head & throttle , etc etc.


ENGINE


-Complete Mivec Head
Code:
+ ported throttle + meter
(+Swap) - SOLD

-3 Layer ZAP Alu Radiator + both fans
SOLD(+Swap with standard radiator and fans)

-NGK iridiums x4 (new) + leads (performance + standard)
RM 280 (+Swap) - SOLD

-Semi forged pistons RM 400 (+Swap) - SOLD

-Turbo Kit (gsr manifold with turbosmart wastegate + TD05 16g)
(includes alloy i/c piping + samco hoses + i/c (boron nitrade) + Greedy Type RS bov (ori) + FPR Sard (Ori) RM 3200 (+Swap) - SOLD

-Gearbox (non lsd frm mivec) + exedy semi race clutch 3 puck (60%)
RM 900(+Swap manual 1.6 / 1.8 gearbox - good condition la)


-2 pot brakes (evo) + pump (evo) RM 500 (+Swap with ori brakes n pump)SOLD

-Gab Adjustable (hi/low) 10k front 5k rear - SOLD

-GAB SA Sports abs & GAB SP Sports Springs - RM 350 Bought last december and never use after 4 mths

-Full ultra racing bars (front 3pt/rear 3pt/lower tower/room lower B pillar/ C pillar - SOLD/bottoms sides/rear antiroll) + FREE Mivec front anti roll - ALL SOLD

-Spoon taiwan (grade A - side of spokes are thinner) +
Kumho KU36(70%) + titanium nuts -RM 1200(+Swap what ever rims you have) SOLD

-ECU + piggyback (unichip) + battery allocation RM 2000(+Swap) - SOLD

-Apexi ACVR & Boost meter + Ark rev-shift timer + auto meter a/f ratio - SOLD

-255 Walbro fuel pump (Ori) RM 250 (+Swap with ori pump) SOLD

-Full length 2.5inch piping for satria with HKS muffler. - RM 200

INTERIOR


-Sparco Fighter full bucket (Red) + semi bucket (black)
SOLD (+Swap with standard seats)

-Steering (ralliart)/boss kit (long)/short shifter/ sparco knob (ori)
RM 350 (+Swap with standard steering) - SOLD

-Steelmate Alarm System
RM 180 (+Swap) - SOLD

-HID 4300k. + 2 sets of Headlamps (Crystal + standard)
RM 200 - SOLD

-Projector Headlamps - SOLD

Obviously all prices are a bit nego, as all items were bought NEW. So no worries about parts failing.

All items are perfectly well taken care off as i love my rides and take pride in them.

Items obviously can be viewed (will even drive you around to test) before purchasing.


Call / sms 012 690 1778 (Chris)

Thank you for viewing.

Location for viewing / test - Damansara / PJ
 

Attachments

  • Engine-Bay-1.gif
    Engine-Bay-1.gif
    465.4 KB · Views: 3,385
  • exhaust.jpg
    exhaust.jpg
    236.3 KB · Views: 236
  • SA SP ABS1.gif
    SA SP ABS1.gif
    494.8 KB · Views: 422
  • SA SP ABS2.gif
    SA SP ABS2.gif
    413.5 KB · Views: 390
  • SA SP ABS3.gif
    SA SP ABS3.gif
    461.3 KB · Views: 373
  • SA SP ABS4.gif
    SA SP ABS4.gif
    483.8 KB · Views: 395
Last edited:
hi bro very nice mods u hv there! two tumbs up! what is the condition of your standard head lamp? Original bosch? can sell to me if its near new condition?
 
Hi dude, thx.

Condition is good as i took it out right after i bought the car and went with crystal.

---------- Post added at 05:53 PM ---------- 6 hour anti-bump limit - Previous post was at 12:14 PM ----------

can bump?

---------- Post added at 11:50 PM ---------- 6 hour anti-bump limit - Previous post was at 05:53 PM ----------

bump~
 
-2 pot brakes (evo) + pump (evo) RM 500 (+Swap with ori brakes n pump). font only or rear oso? if i swap with GSR break +pump what is ur best price?? pm or cont me at : 0132228029

thanks
 
bro hw much if i want the head , ecu and wiring , intake manifold.
 
-2 pot brakes (evo) + pump (evo) rm 500 (+swap with ori brakes n pump). Font only or rear oso? If i swap with gsr break +pump what is ur best price?? Pm or cont me at : 0132228029

thanks

pm replied

---------- Post added at 11:47 AM ---------- 6 hour anti-bump limit - Previous post was at 11:46 AM ----------

bro hw much if i want the head , ecu and wiring , intake manifold.

Hi dude,

Replied you in PM
 
bro wat's ur mivec gb code F5M222 xxxx? and wat's ur best price for mivec gearbox w/o swapping? is tht item come complete with driveshaft and clutch cable as well? looks interested.
 
Bro, Im interested in the structure bars. Pm me the best price. Serious buyer.
 
bro..really interested wiz d radiator set...kindly gimme ur best price

sms/call me @ 019-3097725
 
how much your engine complete set.. ??? interested
 
Status
Not open for further replies.

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience