loudest exhaust system

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

kk13

1,000 RPM
Senior Member
Oct 29, 2005
1,063
89
1,648
hi guys..

just wondering. what is the loudest exhaust system u can get for a fd3s?

what types do you guys use?

is it possible to have straight pipes?

thanks guys..


:driver:
 

elsm80

Known Member
Senior Member
Mar 21, 2006
389
120
3,043
Possible and u get the best flow if its of the right diameter. DO IT! F^%K the aftermarket crap we all usually buy
 

kk13

1,000 RPM
Senior Member
Thread starter
Oct 29, 2005
1,063
89
1,648
heard straight pipe is quite dangerous cause its below the fuel tank and if its too hot it'll may blow...is tat true?

went to ask them JFA is sunway today..said 3 inch straight pipe plus blitz should be loud...

what do u guys think?

right now am using HKS with 3 inch

Bump: will just straight pipe alone be too loud??

Bump: will just straight pipe alone be too loud??
 

TitanRev

You think I print money?
Helmet Clan
Moderator
Mar 3, 2005
8,210
3,678
5,213
Getting the loudest pipe for this weekend Super GT??...:biggrin:sweet....let's blow some ear drums off....Muahahahaha....
 

philip_nst

Known Member
Senior Member
Apr 4, 2006
334
29
1,528
hks super drager is a very queit exhaust,
but i think the apexi hayabusa is the loudest
 

TitanRev

You think I print money?
Helmet Clan
Moderator
Mar 3, 2005
8,210
3,678
5,213
Philip, how does Apexi Hayabusa look like?
 

kk13

1,000 RPM
Senior Member
Thread starter
Oct 29, 2005
1,063
89
1,648
yeah i heard abt it before...apparently its illegal...

have u guys seen the red sun yellow 350z? think that has got a straight pipe with a cone like end.

how abt that?

cause if just straight pipe look a bit odd right?

anybody u know using it?
 

TitanRev

You think I print money?
Helmet Clan
Moderator
Mar 3, 2005
8,210
3,678
5,213
How about the sound of HKS windmaster? that one that look like ex5 exhaust pipe...
 

kk13

1,000 RPM
Senior Member
Thread starter
Oct 29, 2005
1,063
89
1,648
TitanRev - never heard of it bro...btw, r u from sban?

anyways was at JFA in Sunway earlier...he quoted me

RM750 for the 3 inch straight pipe

RM1100 for Blitz muffler

do u guys think its expensive?

know where else i can do it cheaper?

thanks!

:hmmmm:

Bump: TitanRev - never heard of it bro...btw, r u from sban?

anyways was at JFA in Sunway earlier...he quoted me

RM750 for the 3 inch straight pipe

RM1100 for Blitz muffler

do u guys think its expensive?

know where else i can do it cheaper?

thanks!

:hmmmm:

Bump: TitanRev - never heard of it bro...btw, r u from sban?

anyways was at JFA in Sunway earlier...he quoted me

RM750 for the 3 inch straight pipe

RM1100 for Blitz muffler

do u guys think its expensive?

know where else i can do it cheaper?

thanks!

:hmmmm:
 

TitanRev

You think I print money?
Helmet Clan
Moderator
Mar 3, 2005
8,210
3,678
5,213
kk, yup. I'm living in Seremban.
 

savahn

Known Member
Senior Member
Feb 16, 2007
323
60
1,528
Loudest exhaust for FD3S = get a 3 inch SUS 301 stainless steel, down-pipe straight to outlet. No cat, no pre-silencer, no muffler. The thinnest metal you can get.

If you want it louder, have the pipe out the side of the car instead of at the back. Just remember which side the pipe is out as you will cook anybody's legs when you drive pass.
 

TitanRev

You think I print money?
Helmet Clan
Moderator
Mar 3, 2005
8,210
3,678
5,213
Loudest exhaust for FD3S = get a 3 inch SUS 301 stainless steel, down-pipe straight to outlet. No cat, no pre-silencer, no muffler. The thinnest metal you can get.

If you want it louder, have the pipe out the side of the car instead of at the back. Just remember which side the pipe is out as you will cook anybody's legs when you drive pass.
Good one....after the leg one is raw another is medium well...:biggrin:
 

kk13

1,000 RPM
Senior Member
Thread starter
Oct 29, 2005
1,063
89
1,648
TitanRev

I'm also from sban but mostly in KL now

Bump: TitanRev

I'm also from sban but mostly in KL now

Bump: TitanRev

I'm also from sban but mostly in KL now

Bump:
Loudest exhaust for FD3S = get a 3 inch SUS 301 stainless steel, down-pipe straight to outlet. No cat, no pre-silencer, no muffler. The thinnest metal you can get.

If you want it louder, have the pipe out the side of the car instead of at the back. Just remember which side the pipe is out as you will cook anybody's legs when you drive pass.
Yeah was thinking of getting 3 inch straight out..but will it have any effect on the engine? cause no back pressure right? Does it increase power?

Also how will be sound be like? During idling and acceleration?

Has anyone done this before?

If i do this, how much do you think it will cost?

:burnout:
 

TitanRev

You think I print money?
Helmet Clan
Moderator
Mar 3, 2005
8,210
3,678
5,213
I found a few vids with straight pipes..
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/N6MWdXsqPlA&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/N6MWdXsqPlA&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/KrGsicTNQYU&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/KrGsicTNQYU&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/JbudxsLFxt8&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/JbudxsLFxt8&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 

kk13

1,000 RPM
Senior Member
Thread starter
Oct 29, 2005
1,063
89
1,648
Thanks bro

the first one sounds like a truck...

the second one is nice...:biggrin:
 

TitanRev

You think I print money?
Helmet Clan
Moderator
Mar 3, 2005
8,210
3,678
5,213
So KK, made up your mind already?:biggrin::biggrin:
 

savahn

Known Member
Senior Member
Feb 16, 2007
323
60
1,528
kk13,

3 inch straight pipes are not road legal in most parts of the world due to noise and emissions. And they are not neighbour friendly - they could hear you a mile away.

Turbo-charged race engines use straight pipes - the lack of back-pressure means that the exhaust can flow freely right through the turbo improving available power at the upper end of the rev range. I am told that low-end torque supposedly suffers but this being a turbo engine, I can't really imagine why.

This is not the same for most NA engines.

Edit: please note that large straight pipes do not increase power. The power output of your engine is still the same. It merely makes more power available as less energy is required to overcome back-pressure - you free up maybe 5HP at most :)
 
Last edited:

Random Post Every 5 Minutes



Just last Saturday night, the Type-R boys in the know decided to have a merged meet between Singapore and Malaysia at a car park in Mutiara Damansara. The impromptu gathering was initiated by the CTR Club of Singapore and Revhouse, a CTR sub-culture based there. Over 60 Type-Rs made up...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience