Kia Optima Evo4

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
Some bros here know that my bro-in-law was working on a project. Converting his VIP style Optima to have a faster and more 'drivability' motor, 4G63T from Evo4. The project is completed but he faced a lot of challenges. I believed this could be the only 1 in Malaysia, Kia Optima Evo4.

He broke his drive shaft once and a week later, cracked his LSD. Anyway, it is done now. He told me he still has a lot to do but they are coming soon. Bucket seats, silicon pipes... bla bla bla... anyway, do enjoy the pictures!

The car!


Frontal


Rear


Inside






The HEART!!!!!






Exhaust


More to come soon.....
 

ealt

2,000 RPM
Senior Member
Dec 16, 2003
2,395
16
3,138
How come the drive shaft broken?cut and weld? AWD? nice ride there...
 

stutzedward

3,000 RPM
Senior Member
Thread starter
May 27, 2009
3,416
561
1,713
KL
How come the drive shaft broken?cut and weld? AWD? nice ride there...
I think he was overly excited when he got the car. After a few agressive sprints, it broke. Anyway, a new custom made drive shaft (entire set) was made and installed, it's all good now. The LSD broke because the mech did not weld properly to kill the AWD.

I've driven the car. It's very well balanced. A great job installing the engine because it is very smooth and quiet in the cabin, much like the original engine except for the exhaust note. Fast? Well, it's not brutally fast but fast enough for daily use. With 280hp in stock, it's fun to drive around town. Exhaust piping is 3" from front till the muffler.

A lot more to come, until his stuffs are all in, will post up more piccie :)
 

mitsu4G

Known Member
Senior Member
Jan 7, 2009
229
8
1,518
Johor Bahru
waa..finally..well done...Malaysia boleh tuu~..hehehe..exterior n interior wise looks decent je..but when pop up d front bonet,walahh..there u go..:burnout: so bro stutzedward,when wil come out in Extreme/Hypertune mag ni??:biggrin:
 

stutzedward

3,000 RPM
Senior Member
Thread starter
May 27, 2009
3,416
561
1,713
KL
hehe.... thanks for the comments bro.

I contacted Murali from Hypertune and he's interested in the car. Anyway, my BIL ordered buckets seats and a lot more accessories, yet to install em. He wants to fully do up before the photoshoot. heehee....
 

yeohhc

Active Member
Senior Member
May 13, 2006
30
0
1,506
Well done! Bro!

For curiosity, is the body kit custom made? cost how much?

Roughly how much cost involved for doing this engine conversion? If budget allow, i may consider it.:cheers:
 

Azu MET008

Known Member
Senior Member
May 28, 2009
237
32
1,528
Bro..

SEnd for Dyno laa.. Eager to know the HP... If 280hp.. Can tapao Evo standard already..:burnout::nurse::driver:



Regards
 

neogsr

Known Member
Senior Member
Mar 3, 2008
53
3
1,508
putrajaya
great ideas to conv this car using turbo engine,, hav some of my frens conv this car also with gsr ck model engine..:driver:
 

har1th7

Known Member
Senior Member
Apr 1, 2008
371
42
1,528
Q: how bout the engine mounting? same?

...nice & clean (sleeper) ride there...
 

p3jal

1,000 RPM
Senior Member
Jan 20, 2007
1,493
183
1,663
Selangor
yaloh my car now not in gud condition .. nice car evo4 engine in optima~ nice woh ur engine so clean..ehhh guys .. if i want wash engine at car wash safe meh? i always worried when want to car wash , wash engine. any place recommend for wash engine in klang or shah alam or subang?
 

pangyau

1,000 RPM
Senior Member
Oct 17, 2009
1,153
302
1,683
Malaysia
p3jal,

Normal car wash (Tepi Jalan) they just blow the water on to your engine.
That's not the appropriate way, it might harm your wiring & such.

I used sponge & some engine cleaner (at hardware/ACE shop) & clean it.
If you not time for it just sent over to "Car International" (S.Alam, Subang, KLCC).
They didn't use the jet spray to wash your engine.... all by sponge bob...
 

kampoon

1,000 RPM
Senior Member
Mar 4, 2006
1,205
89
1,648
better wash yourself if you have time , just that dun turn on ur pipe till the max and try to use min level water to rinse on ur engine, engine cleaner is a good idea but just dun applie to moving parts like power steering pully, crank pully, Air-cond as well as the belt.....just use soft cotton cloth and try to source PH7 cleaner if possible.....
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
just wipe down your engine every week, not recomended to wash your engine....
will screw up your electronics, happened to me.....after that was the end of engine washing.
 

kumar22mostwanted

1,500 RPM
Senior Member
Jan 9, 2010
1,562
152
1,663
HELL!!!
just wipe down your engine every week, not recomended to wash your engine....
will screw up your electronics, happened to me.....after that was the end of engine washing.
yeah i also see this happening at car wash then i aso wondering whether safe anot :hmmmm::hmmmm::hmmmm:
mainly coz of all those wiring and electronics
i guess just using wet cloth is the safest then
 

Random Post Every 5 Minutes

Hello friends

A very good Thursday from Mauritius :wavey:

This detailing job took over 5 days, from decontamination to coating, loads of defects removal and paint leveling.


Upon arrival:




Wash:

2BM method using mf wash mitt
Local car shampoo and APC mix...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience