Hyundai Gathering 2
- Thread starter BlackSamurai
- Start date
- Replies 112
- Views 11K
-
See what others are reading now! Try Forums > Current Activity
urghh ill be leavin tmr ...for a week cant login for a week...
charles, no 1 bother to reply, i cancel it
open up and spray - copper colour. I think bronze colour should be nicer but went to a few places also dun have the can spray type. The spray paint cost me about RM7 i think.
anyway, i open up cos the headlamp cover totally spoil, need a very heavy polishing job, and now the cover is almost look like new, last time totally yellow and whole surface with micro cracks liao
Next project EL Wire on the headlamp, waiting for the wire to arrive haha......getting the 6500k white EL Wire, most likely will buy the 5mm thick ones. Should last for 3-4 years the wire.
anyway, i open up cos the headlamp cover totally spoil, need a very heavy polishing job, and now the cover is almost look like new, last time totally yellow and whole surface with micro cracks liao
Next project EL Wire on the headlamp, waiting for the wire to arrive haha......getting the 6500k white EL Wire, most likely will buy the 5mm thick ones. Should last for 3-4 years the wire.
Deep$hi+$ said:
HMS, how did u open it? oven it? and how did u glue it back?
easy to open onli. Use the heat gun, set to about 200 degree celsius, heat it up thoroughly at the glue part, then slowly use screw driver to pry open at the grill part (not the signal part). Also remember to reheat when its not hot enough, dun forget the clip too, the clip there need to heat up hotter so it will be soft and won't break when u pry cos its plastic material.
before reseal, heat up both part the cover and housing glue then close it. reheat again and slowly push until tight. Its waterproof liao, no need additional glue.
No need oven lor, my house also dun have oven, summore i feel use oven dangerous cos heating up the whole unit, the clear cover is polycarbonate ler, cannot withstand to hot, summore dunno got side effect if heat up the reflector part or not. I do the Perdana headlamp so long also where to find home oven big enough
Aiya, i got the heat gun mah, so easy lor, some more this is not the first unit i open. Done a lot of perdana and civic headlamp. Wira also got. I do headlamp cleaning and repair mah. Cari makan hehe. As said next project, EL wire mod
If glass headlamp its even easier to open cos dun scare it pecah lor
before reseal, heat up both part the cover and housing glue then close it. reheat again and slowly push until tight. Its waterproof liao, no need additional glue.
No need oven lor, my house also dun have oven, summore i feel use oven dangerous cos heating up the whole unit, the clear cover is polycarbonate ler, cannot withstand to hot, summore dunno got side effect if heat up the reflector part or not. I do the Perdana headlamp so long also where to find home oven big enough
Aiya, i got the heat gun mah, so easy lor, some more this is not the first unit i open. Done a lot of perdana and civic headlamp. Wira also got. I do headlamp cleaning and repair mah. Cari makan hehe. As said next project, EL wire mod
If glass headlamp its even easier to open cos dun scare it pecah lor
Last edited:
yaya when's our next gathering?
Hi all,
I'm new here driving a ATOS 1.0A and don't know peanuts about cars. :frown:
I only did what my friends have been telling that seems to work for their cars.. I.e change to high performance spark plugs, use fuel addictives with the V-power when feeling like trashing the car..
So far it does get slightly faster.. and I was wondering where I can get good advice on air-intake modification and possibility of ECU tweaking..
Oh yah.. my number is 012-2000650 - I'd like to join your TT sessions if possible too..
Thanks
I'm new here driving a ATOS 1.0A and don't know peanuts about cars. :frown:
I only did what my friends have been telling that seems to work for their cars.. I.e change to high performance spark plugs, use fuel addictives with the V-power when feeling like trashing the car..
So far it does get slightly faster.. and I was wondering where I can get good advice on air-intake modification and possibility of ECU tweaking..
Oh yah.. my number is 012-2000650 - I'd like to join your TT sessions if possible too..
Thanks
good! got another kaki driving atos muahahaha
Hmm.. Sotplug,
Got do any modifications to your ATOS ah?
manual or auto?
Got do any modifications to your ATOS ah?
manual or auto?
mieliki said:
me?my atos stock auto nia,juz mod ICE hahaha
Last edited:
oooo...
Hmm.. you know how to make it go faster ah? My one so far okay.. but me wanna fly~!
but no marneee to buy airplane.. :frown:
Hmm.. you know how to make it go faster ah? My one so far okay.. but me wanna fly~!
but no marneee to buy airplane.. :frown:
mieliki said:
faster?ec only juz fill up ur pocket wif $$$$$
btw, about atos...u should ask atos pro in zth > TITANREV, tat fella even install RSM n DEFI gauge in his atos hahaha,ofcoz done mostly all NA upgrade,n his atos like 1.3:cool:
Erm.. sorry.. my knowledge with cars are very limited.. What's a RSM n DEFI gauge? Hmm. how to contact TITANREV?
What's NA upgrade?
What's NA upgrade?
Similar threads
The Marketplace Latest
-
brake caliper spray
- Started by jeff6126
- Exterior and Body
-
JSracing GTwing spoiler
- Started by jeff6126
- Exterior and Body
-
Proton saga drive68 bodykit
- Started by jeff6126
- Exterior and Body
Posts refresh every 5 minutes
Recent Posts
-
Upping Wira 1.5 MMC performance
- Started by Nyfka
- Car Modification
Search
Enjoying Zerotohundred?
Log-in for an ad-less experience