Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="sakuraguy" data-source="post: 480273" data-attributes="member: 6441">.. continuation from above regarding DOUBLE CLUTCHINGDouble declutching (sometimes spelt double de-clutching) is a technique that, if done properly, allows you to down shift smoothly using a manual transmission. Double declutching also allows you to down shift when using a gear box that has no "synchros", or worn "synchros". If you have trouble getting into one or two particular gears, especially when down shifting, you may have worn syncros. Double declutching will also reduce wear and tear on your synchros even if you have good ones, increasing the life of your transmission. Finally, this technique will also allow you to go into first gear when you are moving at slow speeds (10-30kph) even if your gear box would usually resist such a shift. Being able to shift down to first while still moving at these speeds can give you that extra push needed when rolling up to a set of traffic lights that change to green before you stop moving, or in a race where you have to slow down for some reason and then want to take off again in a hurry.This technique can be used on its own, or as is more often the case, as part of the heel and toe technique. This article will describe the process of double declutching only, if you wish to learn the heal and toe technique follow the links provided here or on our tips page. Note however that double declutching is a lot easier to learn than the heal and toe technique and if you plan to do both together you may be better off learning this first, then moving on to the other.So, how do you double declutch ? There are really two parts to the process, the actions required to double declutch, and a second process called Rev Matching. The actions are quite simple, even if they do require some practice. The basic movements are as follows :-Clutch in (press the clutch pedal to the floor) -Move the gear stick to NEUTRAL -Clutch out (release the clutch pedal to its normal position) -Blip the accelerator (push on the accelerator pedal so the revs rise and fall) -Clutch in again -Move the gear stick to the new gear -Clutch out again</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

roof mount vortex generator

Hi guys its been quite a while since i last posted here, anyway i like the look of a roof mount vortex generator similar to what is on the evo 8 and 9 and the wrx i was wondering where i can get one for my Altezza......

DIY carbon Fiber Gear Knob.

My new diy-ed!! CARBON FIBER LMST GEAR KNOB.. Haha..

Before start.
http://img218.imageshack.us/img218/8800/dsc01664fc3.th.jpg

Done...

Which Brand Can Support All Type Of Car ?

which brand's supercharger can support all type of car ?

any supercharger kits for peugeot 206 ?