Reply to thread

from the link that you give.... it tell that " the sequential system has only 61% of the time to inject the fuel as the batch fired system " & we must use bigger injector coz of the time injection limitation....


but this not happen on haltech sequential..... coz haltech can past the time...


this what haltech said:

If the Injection Angle field is set to ‘End of Injection’, then this map sets the End of Injection angle, in degrees BTDC compression, against the engine speed. This allows the injection to be completed before the inlet valve opens. The ECU then times the start of injection, based on the trigger, so that the injection is completed by the specified engine angle. If the ECU calculates that there is insufficient time to complete injection before the specified End of Injection time, then injection will continue past this time.


The Marketplace Latest

Posts refresh every 5 minutes

Peugeot's 208 T16 Pikes Peak Specs Revealed, Packing a Potent 875HP!
https://www.zerotohundred.com/wp-content/uploads/2013/04/208-t16_11.jpg

Peugeot’s return to Pikes Peak has caught a lot of attention, especially by putting the nine-time world rally champion Sebastien Loeb behind...
Evo9 GSR or MR???
Hi Guys,

I'm about to buy an unreg recond Evo9 but need some clarifications on specs between GSR and MR. Appreciate if you guys can advise me on the followings:
1. How can I recognize an Evo is MR? There is one...
For sale: Fully restored to new, 516hp Nissan Skyline R34 Z-tune
A Nissan GTR R34 is still one of the most desirable machines to come out of Japan, high up there with the NSX-R, R35 GTR, and other iconic Japanese machines. Sadly, they are aged and finding a used example in near...

Recent Posts

Search

Online now

Total: 1,079 (members: 0, guests: 1,079)

Enjoying Zerotohundred?

Log-in for an ad-less experience