Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="VectorX2" data-source="post: 1063385481" data-attributes="member: 99968">here is what my problem is....when my car came out of the factory without any modifications... after it's first service, it's idle speed originally 600 rpm increased to 900 rpm, automatically...then after a year driving... once in a while the engine shakes during idle... can feel the vibration throughout the whole body... but after a while idling the vibration stops... or when the aircond compressor runs, the vibration stops too...after i changed the air filter to drop in and changed the exhaust, with the catalyst converter removed, each time it shakes, white smoke comes out of the exhaust, the exhaust becomes clear as soon as the shaking stops...recently when i changed installed adjustable cam pulleys and and adjust the cam timings, the shaking dun just come once a while anymore, it shakes every time i idles when the aircond compressor goes off....i wonder is this actually normal, or sumting when wrong in my upgrading process? or the engine already have a problem from the begining?</blockquote>

Verification

The Marketplace Latest

Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
Mercedes Benz W213 E63 AMG Body Kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

turbo manifold piping

can anyone tell me what type of pipe is use to make a custom manifold?
where can i get it?
thanks.

My RX-7 journals.....

2005.Sept.09 : Collected my 7 and drove it back.

2005.Sept.10 : Driver side external door handle cannot open. So I have a workaround way to fix this. Interested party can contact me on this issue.

Stay tune...

Turbine info 2

IHI VF 23 ------------- 423 CFM at 14.7 PSI
FP STOCK HYBRID -- 430 CFM at 14.7 PSI
IHI VF-30 ------------- 435 CFM at 14.7 PSI
SR 30 ----------------- 435 CFM at 14.7 PSI
IHI VF-22 ------------ 440 CFM at 14.7...