Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="aoinatsume" data-source="post: 3427132" data-attributes="member: 65508">just to highlight something that is important beside the intercooler itself, the pipings too. Depending on the material used, and the workmanship of the welder to bend curves, pipes routing you may gain/lose horse power. Yes indeed that the larger the i/c, there are lags present, however, do not forget the fact that if your intercooler has bigger surface exposed thus more cooling efficiency leads to better horse at higher rpm, and in my case, extremely noticeable.I would suggest instead of getting a cheap china brand bling bling i/c, go for second hand stock evo intercoolers, i got my evo8 intercooler for RM8xx including the pipings, there are mods involved in creating the piping loops, however, nothing beats stock intercooler pipings, the curves are perfect, not pieces mashed together. Even after some heavy boosting, i can still touch the pipes and they are only midly warm, vs my friend's GSR using china brand i/c, it heats up very very fast. and really burns your finger when you touch it.Just my 2 cents, correct me if im wrong :wavey:</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Bridgestone Potenza RE001

have any 1 try Bridgestone Potenza RE001 from thailand compare to japan?

Boost problem...

hi...
l got a problem here...
during idle the boost reading is ok..
between -0.6 to -0.7....
but when drive the car,,and when shift to upper gear and when the boost meter reading is about to 0....the car...

For Sale - Exedy 3-puck clutch for GTR/GTT

For sale!!

Exedy racing single clutch plate (3-puck) for R32/33/34GTR, R32/33/34GTS.

The clutch plate is in very good condition. Call for view. Changed to heavy duty single so i wanna sell this off. Refer to the...