Blox Turbo Oil Inlet

Status
Not open for further replies.
Engine and Performance

Blox Turbo Oil Inlet

SuperVelocity

5,000 RPM
Joined
Feb 27, 2012
Messages
5,365
Points
638
Location
Kuala Lumpur
BLOX TURBO OIL INLET

This kit is flow regulated to prevent bearing cartridge oil seals from blowing out at high oil pressures. The regulator hole is designed with a 1.62mm opening and it can be easily re-drilled with larger hole to increase the oil flow to the turbocharger if necessary. When re-drilling a larger hole, do not exceed 5mm( 7/32 ).

(Universal) complete oil line kit with braided turbo oil drain pipe.
WILL FIT Turbine of: T3, T3T4, T4, T70, T66 , T04B, TO4E, IHI RHC6, T61, T60, GT45, K27 and almost all the turbo chargers (OIL COOLED TURBINE ONLY)

Package Includes:
- Oil restrictor (special designed inlet adapter limits oil flow, effectively prevent blown oil seal caused by excessive oil pressure)

- 1/8" Adapter NPT male fitting that goes to the block and one- 4AN male fitting built on flange. (Made out of Grade 7075 Alum).

- 36" long stainless steel braided line with 3/8 diameter

- comes with gasket, screws/washer

- 17" braided oil drain line

- Heavy duty oil drain adaptors and fittings

- Selling Price RM 150
 

Attachments

  • blox turbo T3T4 oil inlet pipe model 32009 (2).JPG
    blox turbo T3T4 oil inlet pipe model 32009 (2).JPG
    135.1 KB · Views: 260
  • blox turbo T3T4 oil inlet pipe model 32009 (1).JPG
    blox turbo T3T4 oil inlet pipe model 32009 (1).JPG
    149.7 KB · Views: 107
Status
Not open for further replies.

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience