Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="shiroitenshi" data-source="post: 2529354" data-attributes="member: 27518">LMA= Lost motion assembly.. it's what keeps the rocker arm from rattling.I am building and tuning a car.. mine, but I'm doing it on available spare budget (a.k.a. petty cash), so it's slow process, and I still do learn as I go along, so naturally my thinking changes as it goes. I'm really in it for the tech, so things like bodykits and other stuffs are not really something I'd think about.The toda oil pump does not pump more oil. You can check the toda catalogue, and not in any way it claims pump more oil. It's made from better materials so TODA claims it lasts longer, but I seriously don't think that something that looks and is sized exactly like the stock oil pump can pump more oil. The trick for oil pressure is the bypass spring, and that's what people use.Valve grind doesn't actually mean grinding the valves in local Malaysian-speak. It means grinding the valves and valve seat together to ensure a good seal.Since you have very good compression, it's not a necessity, though with the head out, sometimes you have to think 'why not?'. Then again, compression is not dependent on valve seal alone, so perhaps your valves are still in very good condition (I'd leave that to your mechanic to check, maybe he may think that there's too much deposits, and the valve and seats should be ground?)Port work... well, this is a bit difficult. No one can really do it without a flowbench, because it's supposed to be an exact science of getting the four ports to flow exactly the same. Different head porters have different methods, and they all get results. I'd only trust hard numbers though, so if a port work doesn't include flow numbers, why bother? But good port flow can be ruined by poor exhaust/intake choices, so that's the hard part that I can't really put a finger on yet.Based on your part numbers, those are Spec C, not C2, as is apparent by the part num.Those numbers are advertised durations, in the order of : Primary lobe (pre-vtec) : Mid lobe (vtec) : secondary lobe (pre-vtec)Look at the Toda C cam sheets and you will see that the number I mentioned are Spec C's middle lobe (HI as TODA calls it) numbers at 1mm valve lift.Can you help me out and note the numbers in the cam papers?I'm looking for the Cam Top Centre number and the Degrees of the Spec C cams. They are in a box below the diagram of the cam phase.The opening and closing numbers I can obtain from those two numbers so I don't need those.Please post here when you can. I'm seemingly at loss at how to find Toda C cam sheets as no shops in Malaysia has it at the moment.Oh, and I forget, you're supposed to lock the middle lobe in place in order to measure clearance, your mech should be able to figure out how.</blockquote>

Verification

The Marketplace Latest

Toyota Yaris 2019,White ,1.5L,6,082km
- Started by salesarena
- Cars for sale
original WedsSport SA70 18x9jj offset +32 5H pcd...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG4...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ2 RZii...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL 18x9jj offset...
- Started by david tao
- Chassis and Wheels
Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R
- Started by aycy
- Chassis and Wheels
Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...
- Started by aycy
- Exterior and Body
Honda Jazz/Fit GK Mugen body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Goodyear Voted Reader's Digest Trusted Brands Awards 2012

Ms-Claire-Lim-Marketing-Dir-of-Goodyear-Malaysia-and-Y.B.-Dato-Sri-Mustapa-bin-Mohamed-MITI-600x400.jpg

Goodyear, one of the world's leading tyre...

Fake e-boost 2?

Hi Guys,

I'm looking for an e-boost2. Have anyone of you come across a fake turbosmart eboost 2? There is this seller in mudah.com who claims its original, but a closer look at the photo compared to the photos on...

Z videos

Just sharing some stuff I did with my Z in 2009.

[youtube]TAs3q7Az4y4[/youtube]

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

Toyota Yaris 2019,White ,1.5L,6,082km

original WedsSport SA70 18x9jj offset +32 5H pcd...

BRAND NEW original rare Yokohama ADVAN Racing RG4...

original rare Yokohama ADVAN Racing RZ2 RZii...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Rays Volk Racing TE37SL 18x9jj offset...

Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R

Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...

Honda Jazz/Fit GK Mugen body kit

Posts refresh every 5 minutes

Recent Posts

Recommendation: Turbocharger for 4B11 N.A engine

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

Search

Online now

Enjoying Zerotohundred?