Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="shiroitenshi" data-source="post: 2098562" data-attributes="member: 27518">That one I oso dunno, because nobody has ever clayed a b16A with B16b cams and pistons for lift, or did and shared the results.I plan to, on mine, but that one I'll post when I actually do it.. (O_o)I think it's around 3mm or so for minimum clearance of piston face and valves... but not sure. Better check magazines or "reputable" websites.Anyway, you're sure you're losing compression with the h/gasket? It might be the piston rings.. like J101 said.. could be the head got warped, so might need milling.. I milled of mine a bit during conversion, to ensure a tight and leak-less fit.Rod stretch according to mat salleh should range from 1-2mm depending on max RPM, so piston valve clearance should take that in account. Mugen h/gasket I think reduces from 1.3/1.5mm(I'll recheck this number later, raining now! I think it's thinner, but not sure.. and I'm talking about the compressed gasket height.. J101 say 0.7, but I remember it's higher, then again, j101 could be right.) to .5mm or less, I think.. but that one dependent on how much your torqued the head. ARP bolt setups I think usually tighter, but not sure, since I didn't manage to measure one that did it, busy with other work as usual.Some engine builders resurface the pistons valve reliefs for clearance, and probably do it after measuring clearance.Thin head gasket is so expensive that I think that milling the head + stock gasket is better.. but power increase is so minimal you have to wonder if it's worth the 500+ you're going to spend for a new gasket. I wonder if anybody is willing to spend a couple of hundred for before after dyno to prove me wrong.. :PJFD! Sounds like what I usually do in the tunnel too.. hahahaha.. enjoying your 304s eh? :P</blockquote>

Verification

The Marketplace Latest

BRAND NEW original rare Yokohama ADVAN Racing RG4...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ2 RZii...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL 18x9jj offset...
- Started by david tao
- Chassis and Wheels
Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R
- Started by aycy
- Chassis and Wheels
Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...
- Started by aycy
- Exterior and Body
Honda Jazz/Fit GK Mugen body kit
- Started by jeff6126
- Exterior and Body
original TWS Taneisya P1 racing 17x8.5jj offset +28...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing CE28RT 18x9jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

[WTA] Myvi Alternator Positive

Hi all,

I am trying to look for the positive terminal on my Myvi alternator.
Can anyone help by providing pictures?

Regards,
Noobie

need help bout cam.....

Brand: Tomei
Part: Camshafts, (1) Intake (1) Exhaust
Duration Intake: 260
Duration Exhaust: 260
Lift Intake: 11.20mm
Lift Exhaust: 11.20mm
Part #: 143042
Engine: NISSAN SR20DE S14,S15

hello to all sife...would like...

problem with my 245 mr2...

every things seems fine until i got misfiring problem ever since i got the car... at first just need to touch up the tunes but after awhile every thing went wrong.. check everything (wiring, sensor, pipes, plugs and...

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

BRAND NEW original rare Yokohama ADVAN Racing RG4...

original rare Yokohama ADVAN Racing RZ2 RZii...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Rays Volk Racing TE37SL 18x9jj offset...

Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R

Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...

Honda Jazz/Fit GK Mugen body kit

original TWS Taneisya P1 racing 17x8.5jj offset +28...

original rare Rays Volk Racing CE28RT 18x9jj offset...

Posts refresh every 5 minutes

Recent Posts

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

AMPANG mari!!ZTH member

Search

Online now

Enjoying Zerotohundred?