Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="TE27levin" data-source="post: 215749" data-attributes="member: 713">10psi enough to give u at 200+-hp liaw lor.. 4ag big port head flow really well with force induction.this cheap for 4ag 16v owner. buying racing cams already cost u near to RM2000 not including valve spring and cams pulley. remember it might cause ur car unstreetable if u looking for 160hp target..but if going for streetable and breaking 200hp, turbo will do the job and it still revy to 7800rpm le.. target 250-300hp go for T04E and additional injectors will do the job. remain stock cams will be streetable but just turbo lag.( who care if u not go for drift)..20v head not going to flow that well at higher boost compare to 16v big port. the artical is correct i had see some 20v using big turbo is not fast, how ever it still good at low boost running for small turbo.any way 20v n/a with modded cams and piston, run very fast le.. can chase turbo car lar. but u will facing unstreetable problem only. rollakid : CA18DET front cut at KL is around 2000++ only right? dun look in s'wak market. most of us here looking for FR car. seldom have FF car beside vtec. our CA18/SR20 front cut will shot to 3000-4000 la. specially SR20 cos brunei alot of S13, 180sx.. they can sapu all miri SR20 engine and front cut stock . dont buy parts by parts to start 4ag turbo project le.. alot job and money u need to spend lar.. if u like n/a go for 20v, 16v now really MCSB under power. if u really like 4ag turbo then start from 4agze front cut and get a T50 gear box.. slowly few years later start to go for turbo. any way u will not bored of FR supercharger power, really fun and crazy.. the car wont run in striaght line.:lol: :lol:</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28SL 18x8.5jj...
- Started by david tao
- Chassis and Wheels
Proton
- Started by ang141
- Exterior and Body
Mitsubishi Lancer Evolution 3 evo3 Original evo CE9A
- Started by aycy
- Cars for sale
BMW F10 M5 front fender set with air vent
- Started by jeff6126
- Exterior and Body
Proton Persona VVT Drive68 body kit/spoiler
- Started by jeff6126
- Exterior and Body
Honda City Modulo body kit
- Started by jeff6126
- Exterior and Body
Brake Caliper Spray Tiffany Blue
- Started by jeff6126
- Exterior and Body
Honda civic fc ~TypeR Fk8 bodykit ~TypeR grille...
- Started by jeff6126
- Exterior and Body
HONDA CIVIC 2.0 FL5 2024
- Started by rickyteoh2288
- Cars for sale
Toyota Noah ~accident repair ~spray paint
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

what bush is this?

Hi all...

my ride have lots of noises coming from the front chassis esp when hitting bumps and stupik holes.

last week i change the front upper ball joint and during that i found this bushing worn out badly.
-refer...

where can i get fiber material? and how much its cost?

DIY CAR STICKER !!

Is it possible to make a car sticker ourselves ?

normal sticker also can ....but can protect from water ....

who can teach ?