Ae111 lower arm bushes

[AE!!!925]

HI everyone,i'm driving Corolla SEG AE111,Have any one of you guys out there ever replace the front lower arm bushes(big& small),because i've been told that there is no genuine replacement part for it,you need to replace the whole arm if you don't want to use the non-genuine bushes!!any suggestion? I prefer new bushes than the half-cut arm!!Thanks!!(Sorry for my poor English)

 

[xMika]

no such thing la bro .. my ST171 also just change only.. both arm .. new bush .. i was there when my mech change the bush .. something like this

http://t0.gstatic.com/images?q=tbn:ANd9GcTXOxVq7HmQVuL-1P0ajF_qqq9Jb1vCff_5KZkHcn_k-f03zWY&t=1&usg=__xKkVDyNPDTV7hNXwz4Qn9WP1SM4=

Genuine or not is okay ... just make sure that it works well enough.

 

[AE!!!925]

no such thing la bro .. my ST171 also just change only.. both arm .. new bush .. i was there when my mech change the bush .. something like this

http://t0.gstatic.com/images?q=tbn:ANd9GcTXOxVq7HmQVuL-1P0ajF_qqq9Jb1vCff_5KZkHcn_k-f03zWY&t=1&usg=__xKkVDyNPDTV7hNXwz4Qn9WP1SM4=

Genuine or not is okay ... just make sure that it works well enough.

Thanks for reply bro,but the picture that you upload is not the bush that i mean!!What i mean is the bush in the picture below!!

 

[hon_cs]

bro look for this brand call 555 made in japan. i just changed mine few months ago.

 

[AE!!!925]

bro look for this brand call 555 made in japan. i just changed mine few months ago.

Thanks for sharing Bro,i'll try to find it,but this is Sarawak,maybe it's a little bit harder!!LOL

 

[ayathu]

AE!!!925
I've changed it before, but not the ori, its aftermarket from Superpro bit expensive rm70/pc for the second pic one, for the first one I only replace with a teflon bush at a press shop.

Dono if can get it there.

 

[AE!!!925]

AE!!!925
I've changed it before, but not the ori, its aftermarket from Superpro bit expensive rm70/pc for the second pic one, for the first one I only replace with a teflon bush at a press shop.

Dono if can get it there.

Thanks for sharing,there's a lot of non-genuine bush here,but most of it are made in Malaysia&Taiwan.Not sure weather can be trusted or not!Maybe there are" made in Japan" out there,i just haven't found it!!Rm 70 is still a reasonable price,at least i think so!!

 

[Felix Chu]

AE!!!925,

I ve change mine to superpro, so far so good.........plus, it is a stiff compare to OEM...u can gif it though....

 

[AE!!!925]

AE!!!925,

I ve change mine to superpro, so far so good.........plus, it is a stiff compare to OEM...u can gif it though....

thanks for your recommendation bro,that brand 'superpro' ,is it made in japan?

 

[ayathu]

It's from Australia.

 

[Felix Chu]

Yes, SUPERPRO is made from australia..u can check their online catalog

 

[bera]

hii....sorry to hijack the thread...but where can i find these...??

 

[ayathu]

Try hokomotor in bt caves or Pentagon in Jln Pudu,KL

 

[yloon]

is there any 555 lower japan bush in the market? i aware 555 got dog bone only.

 

[Acoustic]

wah lau, dog bone :)

Anyway, such bush can be pumped out and replace by ANYTHING of the same size/dimensions. Example see my site. My bush still working fine after 9 years of using less rubber type from other cars. Surprise surprise!!!! No need original also can.

Control Arms Bush from Honda SM4 for Rear Axle of Toyota Corolla KE70 or Levin / Trueno AE86

as long as understand why and what then figure our how then ok lor.

 

[ken yeang]

To save the hassle finding genuine bushes, It say might as well use the SuperPro. They are available in Malaysia through various authorised dealers in KL. They can deliver them to you via mail order. The ride using SP is not that harsh, but gives better feel of handling. Some say the SP would give "ngek ngok" sound, but I guess it was mainly caused by improper installation.

The bushes you have mentioned are quite common, and these bushes are likely to interchangable between AE100, 101 and 111 model. So I believe the demand for them are high, thus likely to have them in stock in many places.