A33 front bonnet stopper

[doraemon98]

This part is rarely changed. But I cannot tahan seeing my bonnet out of alignment.

These original nissan bonnet stopper from Japan cost me RM34/pair. Would be good if can find compatible ones.

After changing it, I felt like the assembly plant did not fix it properly earlier. After aligned the bonnet myself, notice the lock is a bit way too far below, hence applying too much pressure to the stopper. So I realign the lock further up. Hopefully I dun hv to replace the stopper anymore.

Below photos are for reference.

Please post here if you manage to get compatibles.

http://www.zerotohundred.com/newforums/attachment.php?attachmentid=279150&thumb=0


http://www.zerotohundred.com/newforums/attachment.php?attachmentid=279148&thumb=0
The stopper has a screw tread. Just turn clockwise and anti-clockwise to adjust its height.

http://www.zerotohundred.com/newforums/attachment.php?attachmentid=279151&thumb=0

http://www.zerotohundred.com/newforums/attachment.php?attachmentid=279149&thumb=0

 

[Cefiromaniac]

bro,

i had this same problem with my A32 changed the stopper made slightly better so far my A33 no issue yet but by hydrolic bonnet holder dam noisy when open and close.

 

[doraemon98]

bro,

i had this same problem with my A32 changed the stopper made slightly better so far my A33 no issue yet but by hydrolic bonnet holder dam noisy when open and close.

Bro... you must do adjustment after replace the stopper. Btw, how much you bought the stopper?

Gas spring noisy ah? I dunno woh... going to kong already maybe?

 

[Cefiromaniac]

bro,

if i could remember i paid 20+ at vanli jln ipoh.

cheers

 

[doraemon98]

bro,

if i could remember i paid 20+ at vanli jln ipoh.

1 set of 2 pieces or 1 piece for RM20+?

 

[Cefiromaniac]

each around RM 20+ i could remember bro