Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="EG9" data-source="post: 1679964" data-attributes="member: 396">Metal head gasket? You'll get higher compression but anyway ur cam degree will not be accurate anymore due to different gasket thickness. Power will not optimize if cam degree is not optimum. Actually it's not easy to increase N/A engine power. After metal head gasket installation, you'll not satisfied with the power coz the cam degree is not optimum, then you go and get adjustable cam pulley, after that look for tuner to set you cam at optimum degree by using cam dial gauge. From the initial step untill the last step..how much have you spend?Metal head gasket: RM320adjustable cam pulley for exhaust cam: RM650 (Toda) -New (Local manufacture unit: RM300-350)Installation fees plus setting: RM200 -RM300 (Depend on the tuner)But how many HP do you gain? 1 or 2? But definately got increase in engine respond. Port polish? of coz good if do it properly. Actually there is no short cut in engine modding.The fundamental on engine modding it to increase power output of the engine.1. Get higher engine compression2. Get optimum mixture of A/F ratio3. Aggresive ignition timing 4. Lighter and balance engine internal BUT it's not easy to achieve the above mentioned element. All also need ALOT of MONEY!!Why Vtec engine is powerful?Because the engine meet above mentioned requirement.Alluminuim crank pulley: lighter unit and increase engine respond BUT I'll not install it because it's not durable. AFter sometime it will start to wear off and become very sharp edge and cut off you belt. Not much you can gain from there. HP won't increase. Better spend the money on after market flywheel. Although the HP won't increase but power respond do increase and u can feel it immediately.</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels
Endless Racing Mono6 + Racing Mono4 R35 GTR GTR35...
- Started by aycy
- Engine and Performance
WOT Dual Oil Cooler Kit Civic Type R FL5
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

low compression piston

is there any low compression piston that can fit into myvi engine?
yrv piston can fit?
need to bore the block?

Eunos Cosmo 20b

How often do you see a Cosmo 20B on the road in Malaysia? Saw this car in LDP......

View attachment 631869
View attachment 631870
View attachment 631871
View attachment 631872
:adore:

HKS Track Attack Altezza

View attachment 603939

View attachment 603940

View attachment 603941

Car Specs

2000 Toyota Altezza
Owner: HKS Japan, Fujinomiya, Sizuoka ken, Japan
Engine Type: 3S-GTE
Displacement...