Brakes, etc (Brembos & APPs) for sale

Status
Not open for further replies.
Chassis and Wheels

Brakes, etc (Brembos & APPs) for sale

PabloIceman

3,000 RPM
Senior Member
Joined
Apr 22, 2006
Messages
3,103
Points
1,683
Evo performance parts for sale

UPDATE - 19 Dec 2012 (PRICE REVISED ON SOME ITEMS & ITEMS/PHOTOS ADDED)

ZTH members get special discount.

ITEMS AVAILABLE

1) 2-point Front strut bar from MINES (rare). Rear sold off already Lightweight. For Evo 4 to 6.5. RM 350 neg (Price revised)
Pic ===>
P9200138.jpg

P9200140.jpg


2) ACL Racing Main Bearings (New) for Evo 4 to Evo 9 - RM 500 (Back on sale as Buyer MIA)

3) Brand new Cometic 1.5 mm Head gasket for 86 mm cylinder (E4 to E9) -- RM 520 (Back on sale as Buyer MIA)

4) Evo6 OEM Piston w/rings, Evo6 OEM conrods w/bearings (still in good condition. Can be used on E4 to E8. E9 not sure). - RM 700 neg. Can buy main items separately

5) Evo9 2.0L MIVEC short block with complete with Grex/Trust piston, piston rings, con-rods, crankshaft, bearings. Pls. offer

6) Evo 6 original crankshaft ONLY RM 600

7) EVO 4-9 OKADA plasma coil pack used (2pc) with brand new pair of NGK coils - RM 1200

8) Jspeed ECU for CP9A (Evo 5,6 and 6.5) ... re-flashed with ECUTEK
RM 2000 Original Jspeed RM5k+ (without re-flash)
Link ===> ƒJ[ƒXƒe[ƒVƒ‡ƒ“@ƒ}ƒ‹ƒVƒF
Pic ===>
615a764c.jpg

593afaa1.jpg

9711f009.jpg

From website ...
d475a149.jpg


9) 2 Front slotted 330mm. Thickness 28mm for 6-pot front-- Floating type replacement AP Racing rotors. Center piece can be fabricated RM 1500
d144bfcd.jpg


10) 2 almost new (more than 95% thread left) Dunlops 225 x 45 x 17 RM 800 (item location JB)

11) Used E5/6/6.5 Air Flow Sensor - Pls. offer
Pic ===>
P7301114.jpg

P7301115.jpg


12) Used E6 floor mats. Slightly worn for driver side. the others still very good condition. RM best offer secures.

13) Used original Momo steering with airbag from Evo6.

14) Used Trust TD06-25G turbokit with wastegate (comes with custom header cover, header wrapping, custom Aluminium intake piping and Airinx2 filter) ==> RM5000(Price revised)
P8230124.jpg


15) Used Monster CF air box (Evo 5, 6, 6.5 and 7) - RM 600 o.b.o.
P5210029.jpg


16) New AMS exhaust pipe, center piece (Evo 7 to 9) - RM 400
P1161555.jpg


17) Used Evo 4 to 6.5 suction pipings done by late Ja'afar - RM 300 o.b.o
IMG00327-20100320-1912.jpg

IMG00326-20100320-1911.jpg


18) Selling on behalf of friends the following items:

a) Used, good condition HKS dog-box for CP9A & CT9A (gear sets only) - RM 30,000
b) Used, almost brand new rear 1.5 - 2 Way CUSCO LSD for CP9A and CT9A - RM 3,000

LSD001.jpg

LSD003.jpg


Items are negotiable. Stay tuned in the coming weeks for more goodies!


ITEMS SOLD

1) Real CF (2x2 weave) door pillar trim/garnish for E4 to E6.5 (4 pcs/set for left & right doors)

2) Rear bumper exhaust protector in CF (2x2 weave) for Evo 5 to 6.5

3) Ohlins Front Pillowball mount/camber plates for E7 to E9. Almost new. No damage. Changed out as self using the HKS one for E6.

4) 4 pcs of Advan RS 17 x 8.5jj +31 Gunmetal rims with Advan Neovo tyres 235 x 45 x 17 (80% thread left). Can clear Endless and AP 6/4 pot racing brakes

5) Used Calconic Evo 6 radiator (ori size)

6) Original used adjustable Cam pulley

7) Original used oil cooler

8) Used original front & rear suspensions

9) Used original I/C (without pipings)

10) Original Evo6 front lamps with signal

11) Used FIC 850cc fuel injectors (4pcs for 4g63)

12) Used Arospeed Engine Damper

13) Used HKS Circle Earth Wire

14) Bilstein Shocks with Tein springs (for E5 to E9):- No leaks. Used for 10 months. Originally from an E9.

15) HKS Rear pillowball mount for E4 to E9 (almost new)

16) Kansai Service 3-point Front & Rear Strut bars

17) ARC titanium exhaust manifold heat shield

18) HKS green suction filter 200 mm with customised piping to fit GT35R turbo inlet

19) Varis CF rear boot with support (Duck lip) for E7-E9

20) Original JUN anodised red Engine Oil filler cap

21) Used Ori Spark plug cover (the one with the "Mitsubishi" word on it)

22) APP 2-piece front slotted rotors. Size 320mm. Never skimmed

23) Evo6 cylinder head with HKS 272 camshaft, springs & retainers. Condition excellent. Just plug & play.

24) Signal Auto Engine Torque Damper

25) Used Walbro 255 l/hr fuel pump

26) New 5-speed black Ralliart gear knob

27) Billon Air funnel 100 mm (Blue)

28) Brembos (ex-evo9) complete

29) Energy Hyper-Flex System Complete Master Set

30) Sold on behalf of friend: Evo 8 MR original Rear Spoiler

31) Tomei Oil Thermostat

32) Very new HKS Oil cooler

33) Used HKS 272 camshafts, retainers and springs with Evo 4-8 Cylinder head

34) Energy Hyper-Flex bushings complete

35) 1 pair of Front AP Racing replacement Slotted rotors

36) Desmond Regamaster Rims - 17' x 8jj. Offset+22.

37) New HKS GD Pro Twin plate Clutch + New bearing. Comes with converson kit. For 5 or 6-speeder

38) 2 x New GSC S1 camshafts for evo 4-8 Non-Mivec

39) Weapon R radiator coolant tank

40) Used FP Green 20G Turbo

41) 880 CC Fuel Injectors

42) Brembos (ex-evo6) complete. Brake pads still good 80%. Rotors never skimmed before.

43) TD05 - 16g turbo

44) Evo 6 original bodykits , white colour (Front bumper with CF lip, Front bonnet, Front & rear wheel fender, rear boot with Evo 6 spoiler and Evo 6 original sticker.

45) Ikeya Formula sequential shifter (almost brand new) & new indicator.

46) Used Carbing 3-meter CF holder for Evo 7, 8 & 9.

47) Used Carbing 4-meter CF holder for Evo 7, 8 & 9.

48) Used Apexi Power FC D-Jetro for evo 7 and 8.

49) Used HKS fuel rail and SARD big fuel regulator with high pressure hose.

50) Aftermarket SS exhaust manifold(banana) & SS exh. O2 pipe.

51) Power FC D-Jetro for CP9A




Location of items :- JB & Malacca.
*** Thanks for looking!!*** Can PM or SMS me at 012-6311864
 

Attachments

  • th_P8230124.jpg
    th_P8230124.jpg
    4.8 KB · Views: 5,808
Last edited:
bro interested in item num 15 the tomei engine.wats ur best price??
 
bro, need more xplaination about item 12 ( rotor ). tq
just pm me

tq
 
wow...
So many of my wishlist items are on the list bro. :banghead:
 
Any rear strut bar for Evo 4? Looking for it..........Thx:biggrin:
 
Bro..i'm looking for e9 rear bumper ..if u have...pls pm me
thanks
 
bro wat is the asking price for td05 hra titanium fin?
pls pm me......
 
How's MLRT member?

Do u need to discount? 555555 ^^

ขอให้ขายได้ ไว ๆ นะ พอล ^^'



bumppppp for my friend^^'
 
How's MLRT member?

Do u need to discount? 555555 ^^

ขอให้ขายได้ ไว ๆ นะ พอล ^^'



bumppppp for my friend^^'

Doctor, thanks for the bump my friend .....

MLRT members also get the discount ... Mai pen rai Khap ... :biggrin:
 
Re: Evo performance parts for sale

17) Used Evo 4 to 6.5 suction pipings done by late Ja'afar - RM 300 o.b.o
IMG00327-20100320-1912.jpg

IMG00326-20100320-1911.jpg

bro, interested with above item.

- can it fit to my engine arrangement (e4 engine, ck4a chasis)?:
4g63t.jpg


- how much incl. postage to kuantan?

thnks.
 
Re: Evo performance parts for sale

bro, interested with above item.

- can it fit to my engine arrangement (e4 engine, ck4a chasis)?:
4g63t.jpg


- how much incl. postage to kuantan?

thnks.

Let me check the postage. Should fit your stock stuff because i was using the stock parts all ...

U have a number. PM me. also the address in Kuantan.
 
Status
Not open for further replies.

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience