- Joined
- May 28, 2006
- Messages
- 227
- Points
- 1,518
1.3 MYVI Marco Exhaust System & Extractor
MARCO Exhaust System & Extractors:
1. 4-1 Extractor: RM380, RM360 without installation
2. 4-1 Mild Steel Extractor: RM250, RM230 without installation
3. MYVI MRD (Marco Racing Development) Exhaust System:
Consist of 4-1 Extractor, Centre Bullet, Full 1.6" inlet diameter pipping, Muffler with Twin Pipe
RM1250 incl Installation, RM1150 without installation.
Here's how it looks after installation (Photos are taken after one month of usage,notice how new they still look? Those spots underneath are dried water spots) :
Not much welding required:
Note: Every item quoted above are made of stainless steel and mandrel pipping
Dyno Results (Unfortunately can't get the chart from Marco but here are the figures):
Dyno car mod-
Perodua spark plugs & engine oil
Redline drop in filter
Pivot sparkearth, stabiliser & grounding
Marco MRD Exhaust System with 4-1 extractor
Power:
42.3hp @ 3,000rpm
46.5hp @ 3,500rpm
53.6hp @ 4,000rpm
63.1hp @ 4,500rpm
66.8hp @ 5,000rpm
71.3hp @ 5,500rpm
71.7hp @ 6,000rpm
72.1hp @ 6,500rpm
Torque:
91.3nm @ 3,000rpm
98.2nm @ 3,500rpm
101.2nm @ 4,000rpm
102.1nm @ 4,500rpm
99.4nm @ 5,000rpm
94.9nm @ 5,500rpm
84.0nm @ 6,000rpm
79.1nm @ 6,500rpm
Location for Marco's Workshop: Malim Jaya, Melaka
Items without installation is inclusive of delivery.
For further enquiries,PM me or contact Darren at 017-2503131.
MARCO Exhaust System & Extractors:
1. 4-1 Extractor: RM380, RM360 without installation
2. 4-1 Mild Steel Extractor: RM250, RM230 without installation
3. MYVI MRD (Marco Racing Development) Exhaust System:
Consist of 4-1 Extractor, Centre Bullet, Full 1.6" inlet diameter pipping, Muffler with Twin Pipe
RM1250 incl Installation, RM1150 without installation.
Here's how it looks after installation (Photos are taken after one month of usage,notice how new they still look? Those spots underneath are dried water spots) :
Not much welding required:
Note: Every item quoted above are made of stainless steel and mandrel pipping
Dyno Results (Unfortunately can't get the chart from Marco but here are the figures):
Dyno car mod-
Perodua spark plugs & engine oil
Redline drop in filter
Pivot sparkearth, stabiliser & grounding
Marco MRD Exhaust System with 4-1 extractor
Power:
42.3hp @ 3,000rpm
46.5hp @ 3,500rpm
53.6hp @ 4,000rpm
63.1hp @ 4,500rpm
66.8hp @ 5,000rpm
71.3hp @ 5,500rpm
71.7hp @ 6,000rpm
72.1hp @ 6,500rpm
Torque:
91.3nm @ 3,000rpm
98.2nm @ 3,500rpm
101.2nm @ 4,000rpm
102.1nm @ 4,500rpm
99.4nm @ 5,000rpm
94.9nm @ 5,500rpm
84.0nm @ 6,000rpm
79.1nm @ 6,500rpm
Location for Marco's Workshop: Malim Jaya, Melaka
Items without installation is inclusive of delivery.
For further enquiries,PM me or contact Darren at 017-2503131.
Last edited:
