S.o.s.

weikee

500 RPM
Senior Member
Thread starter
Jul 16, 2006
924
15
1,518
it come with the sensor, front and back.

If i remember correctly its similar to the some model in U12, U13. when WOT, it will harden the mount.
 

Lawcc

Known Member
Senior Member
Jul 15, 2005
466
5
1,518
Damansara
Let me know when your car is about to ready. Will visit your mechanic then.

BTW, you paid 4k for the 1/2 cut with trade in? Or 4k for 1/2 cut, how much is your trade in value?
 

Lawcc

Known Member
Senior Member
Jul 15, 2005
466
5
1,518
Damansara
When diagnose, O2 reading does not show at the correct level. Replace the O2 sensor, still the reading is the same.
 

weikee

500 RPM
Senior Member
Thread starter
Jul 16, 2006
924
15
1,518
4k with trade in.

Its a 3L leh, not easy to find a 3L 1/2 cut with only 70k mileage.
 

weikee

500 RPM
Senior Member
Thread starter
Jul 16, 2006
924
15
1,518
wow.. i got it much lower.. Last i found was only 5k.

BTW, my friend got another 1/2 cut 2.5L Manual a32. less than 4k.
 

weikee

500 RPM
Senior Member
Thread starter
Jul 16, 2006
924
15
1,518
guess my trade in will be somewhere around 1.5k.. since my engine its not in the optimal performance, i think its about there loh. anyway I may not want to give the autobox back :D
 

cgui

500 RPM
Senior Member
Oct 20, 2004
600
0
3,016
Setapak
wow.. i got it much lower.. Last i found was only 5k.

BTW, my friend got another 1/2 cut 2.5L Manual a32. less than 4k.
wow 2.5L manual A32.. should be from the philippines .. i guess they don't have it in Japan rite? Comes with the full works including body?

too bad tat i don't have the $$$ to spend rite now...
 
Last edited:

weikee

500 RPM
Senior Member
Thread starter
Jul 16, 2006
924
15
1,518
from japan lah, my friend don't go Philippine to chop car. Philippine car condition are worse than in Malaysia.
 

weikee

500 RPM
Senior Member
Thread starter
Jul 16, 2006
924
15
1,518
just called my mechanic, car started and everything in.. will soon put in the dash board.
 

Random Post Every 5 Minutes

Hi all,

i driving a mazda lantis 323F with B8 turbo. Currently i am facing a problem..my engine mounting, no matter ori or local one...after a while then it broken already. it seem like the stock mounting cant take the increase power from the turbo engine.

i currently custom made one hard mounting (no rubber at all), it seem help but then it sacrify all the daily drive comfortability. u can feel the whole car is shaking when u release the throttle or at high rpm.

so, any good idea for...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience