Need help...,

wfc31

Known Member
Senior Member
Aug 11, 2004
138
0
5,016
wfc31.fotopic.net
i have a 2" meter pillar for my Wira, can anybody tell me how to take out my OEM driver side plastic pillar cover in order to install the gauge pillar?
i don want to overlap it on the OEM plastic pillar because my gauge pillar is direct fit size as the OEM one.
 

jinkl

4,000 RPM
Senior Member
May 22, 2004
4,624
376
3,183
Kuala Lumpur
how to take out.. easy
put a screw driver .. and push it out thru the corners..
its actually juts clips la inside :D
 

wfc31

Known Member
Senior Member
Thread starter
Aug 11, 2004
138
0
5,016
wfc31.fotopic.net
jinkl,
:o , it is just a clip like the door panel? no screw or any tightening stuff? how many clip it does, top / center / bottom ?
just push it out by screw driver?
 

wfhan

4,000 RPM
Senior Member
Jan 9, 2004
4,339
96
3,148
selangor
ya just clips, careful when u "korek" out the pillar panel
might break some clip's leg. better get some
spare one first b4 u DIY on this incase some of the leg
breaks..
 

wfc31

Known Member
Senior Member
Thread starter
Aug 11, 2004
138
0
5,016
wfc31.fotopic.net
wfhan,
u mean 'korek' is push out the pillar?
'korek' from the top size rite?
i try to korek, but i seem like very tight ler, no problem ah?
 

Shanashi

500 RPM
Senior Member
Nov 17, 2003
679
17
3,018
Visit site
korek from the top...then after the first clip from the top is out try korek the second clip but note dont pull it towards the passenger side instead try "pulling" it from the top after the second clip is out cuz of the dash unless you dont mind scratches....hope this helps....but no biggie just pull da frigging thing out only k :lol:
 

Random Post Every 5 Minutes

As above that which 1 need minimise mod on putra to able to fit in? If i drop in Evo2 front bodykit do this match with putra overall side and rear view? Any advises N comments r appreciate.

Since i have all parts from evo2 wihtout lips only if not using is a waste. How much nows a day for mirage hood and bumber only either big spot light and small fog light, didn't care since going to cut it to let way for my oil cooler and intercooler piping. Those 2nd generation mivec bumber can fit to...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience