problem like this usually happen if mr chua living in condo which at least have 2 phone lport in the house. as for any adsl modem, the phone line cannot be split in 2 before reaching the modem. the adsl light will keep blinking. to solve this, connect one of the phone port to the modem, and the other phone port to the phone. take out the phone handle (gagang talefon) from its rest place. and you can see the adsl port will be stable. but once u hang up the phone back.. adsl light will blink back. this is hard for tmnut to trace as the phone box is outside the building and usually lock somewhere under the condo management.
another is also a similar connection.... normal house using one phone line but split to two phone before modem. this can be easily adjusted. for adsl usb modem, make sure the main line from outside ur house go straight to modem first, then at the back of the modem there line out to connect to ur adsl filter then straight to ur phone. connect the adsl filter to the modem, and after the filter you can split your line as much as you want. and for those who use router (with network card type) make sure the main line go to ur adsl splitter first, then one port to modem, and the other post you can split as much as you want.
*no no.. im not working with tmnut or stimix...im just a plain broadband user who happen to work in the IT world...hehe.......
*mr chua- dont get so pissed off.. the problem starts from your place
*operator-good job entertaining person like mr chua