FULL RACE Civic EF Pro Street Traction Bars
Full-Race traction bars are designed for road, drag race, or daily driven street cars. This part is a must for every driver seeking to increase traction, lower 60 ft times, and eliminate wheel hop.
Application Notes:
- Traction bars are designed for use with our radiators.
- Stock radiator must be angled back for hood clearance.
- Must use EG/EK/CD radiator mount bushings.
- 1/2 sized Civic radiator can also be used, must be angled back for hood clearance as well.
- Stock radiator mounting tabs must be relocated or removed prior to traction bar installation.
- Full alignment is recommended after traction bar installation.
- Traction bar install guide is available in the tech/install section on the website.
Key engineered features include:
- Bolt on installation, no welding required.
- Will accommodate large downpipes and or headers.
- Designed with PERFECT suspension geometry, will not cause binding.
- Aluminum knurled radius arms allow for quick and easy caster adjustment.
- DOM crossbar is handcrafted and MIG welded.
- Full Race Traction bars are CAD designed. They are engineered with a factor of safety (FOS) of 5, meaning they are 5 times stronger than they need to be.
Suitable For CIVIC EF.
Bakuso Racing Sdn. Bhd.
No.21, Jln PJS 11/24,
Bdr Sunway.
47500 Subang Jaya.
Operation Hours: Mon~Sat 9am~7pm
GPS: Latitude 3.067118, Longitude 101.601951
Click Here For Google MAP Location
Land Mark:
Same row with Kedai Tayar Silverstone Teck Meng, REV PERFORMANCE, Millennium, 2 shops beside SAMURAI RACING.
For serious buyer please Whatsapp or SMS
Desmond 017-396 8567
Email us : [email protected]
Dealing method : Pos/Courier everywhere in
Malaysia including Sabah, Sarawak, Brunei, Indonesia, Thailand, Singapore and all area in Asian.
Full-Race traction bars are designed for road, drag race, or daily driven street cars. This part is a must for every driver seeking to increase traction, lower 60 ft times, and eliminate wheel hop.
Application Notes:
- Traction bars are designed for use with our radiators.
- Stock radiator must be angled back for hood clearance.
- Must use EG/EK/CD radiator mount bushings.
- 1/2 sized Civic radiator can also be used, must be angled back for hood clearance as well.
- Stock radiator mounting tabs must be relocated or removed prior to traction bar installation.
- Full alignment is recommended after traction bar installation.
- Traction bar install guide is available in the tech/install section on the website.
Key engineered features include:
- Bolt on installation, no welding required.
- Will accommodate large downpipes and or headers.
- Designed with PERFECT suspension geometry, will not cause binding.
- Aluminum knurled radius arms allow for quick and easy caster adjustment.
- DOM crossbar is handcrafted and MIG welded.
- Full Race Traction bars are CAD designed. They are engineered with a factor of safety (FOS) of 5, meaning they are 5 times stronger than they need to be.
Suitable For CIVIC EF.
Bakuso Racing Sdn. Bhd.
No.21, Jln PJS 11/24,
Bdr Sunway.
47500 Subang Jaya.
Operation Hours: Mon~Sat 9am~7pm
GPS: Latitude 3.067118, Longitude 101.601951
Click Here For Google MAP Location
Land Mark:
Same row with Kedai Tayar Silverstone Teck Meng, REV PERFORMANCE, Millennium, 2 shops beside SAMURAI RACING.
For serious buyer please Whatsapp or SMS
Desmond 017-396 8567
Email us : [email protected]
Dealing method : Pos/Courier everywhere in
Malaysia including Sabah, Sarawak, Brunei, Indonesia, Thailand, Singapore and all area in Asian.
Attachments
-
22.8 KB Views: 513
Last edited: