b16a halfcut manual plus installation..

[ballaq]

Hi all civic member...

how much the cost for this conversion for my ek and where the w/shop (prefer penang or kedah area)can offer cheper??becoz some of w/shop said the cost around RM8500...for eg h/cut..is that so high cost for eg h/cut..don't know how bout the cost if using ek4 h/cut....

 

[sPoOn3838]

hey ballaq come to alor setar eg halfcut rm4500

 

[albani]

hwoaaa...sounds delicious! i heard jitra got plenty of hafkat...where aaa?

 

[hattech-v]

Hi all civic member...

how much the cost for this conversion for my ek and where the w/shop (prefer penang or kedah area)can offer cheper??becoz some of w/shop said the cost around RM8500...for eg h/cut..is that so high cost for eg h/cut..don't know how bout the cost if using ek4 h/cut....

ek hakfat normally around 6-6.5K for SGDM, 7-7.5K for JDM EK4, EG shud be around 5-6K.

 

[edy7311]

hey ballaq come to alor setar eg halfcut rm4500

woww.. super cheap rm4500 if manual. my pomen buy 2 hafkat in Penang recently. eg6 rm5600 at chai leng park & eg9 rm6000 at bkt tengah..

saw some fren put eg6 hafkat to EK, cost him rm7000 to everything done..

ballaq, better go to a/setar there.. eg ECU can upgrade at cheaper cost! if EK, more $$$ need to spend.

 

[ballaq]

is that h/cut with lsd gearbox for rm4500..

 

[sPoOn3838]

not sure u should come have a look

 

[hellboyz]

waaa ballaq..looking for Big VTEC ka?..better chose engine from eg la..coz easily can b upgrade..for ek u hv 2 change whole ecu..as i knw laa..alaaa red head laa..hehehe....
eg hafkat =rm 5-6k w/out lsd.,6-7k wif lsd......ek hafkat around 6-7k w/out lsd.,7-8k wif lsd..market price laa..but edy got only 5k smthing..very2 cheap...came wif lsd lagii..huhuhu..ngeri..ngeri...

 

[egtaufu]

Really ka???Like my pren la he got EG9 hcut plus installation around RM6k++.So jealous la....
Ballaq!Later if you get the best price for any hcut,don't forget to tell me ha!

 

[albani]

me too!!!!!!!

 

[greyrex]

albani,

Hei bro!How's life there?When want to go tt?I'll be back on 11 Jun...maybe can meet around evening.Is bro Hawke in Penang as well?Cheers!

 

[hellboyz]

Really ka???Like my pren la he got EG9 hcut plus installation around RM6k++.So jealous la....
Ballaq!Later if you get the best price for any hcut,don't forget to tell me ha!

as i know,dat price was after trade-in d standet engine..izzit correct?..huhuhu..dat pomen names,Ayah Pin..kan..kan..?

 

[rie]

can any body tell me da different between ek sgdm and JDM ek4 hafkat aar...which one is better maa...confius already to swap my engine...pls...tell me..also the price....i'm staying i kedah now..

 

[hydro]

Hi all civic member...

how much the cost for this conversion for my ek and where the w/shop (prefer penang or kedah area)can offer cheper??becoz some of w/shop said the cost around RM8500...for eg h/cut..is that so high cost for eg h/cut..don't know how bout the cost if using ek4 h/cut....

where u ask... i ask also 8000 at jalan perak sim w/shop..

 

[ballaq]

where u ask... i ask also 8000 at jalan perak sim w/shop..

w/shop at seberang prai area....

 

[ballaq]

Can trade in accepted.I meant my engine trade in with the h/cut...could the chop shop accept that?

 

[hydro]

ya...they take all parts

 

[hellboyz]

8k?..hafkat + installation?.got LSD?..eg/ek hafkat?..wey ballaq.,head merah laaa...hehehehe..:_:

 

[kuNyit]

head merah? just buy the type r cover head...
kaltim! but dont aspect your engine fast as type r engine lol!

 

[ballaq]

walawe...head merah need so much "kepala agung" ooo...:shades_smile:

 

[hydro]

eg into ej ,, no lsd... all normal...

 

[edy7311]

can any body tell me da different between ek sgdm and JDM ek4 hafkat aar...which one is better maa...confius already to swap my engine...pls...tell me..also the price....i'm staying i kedah now..

fr my poor knowledge..

ek sgdm no digital acond [same like local]. speedo meter until 220km/h
ek JDM got it. but, speedo onli 180km/h

both wit black color dasboad. price diff is abt rm1000!

ECU & performance, i think should be a same. stil P2T OBD2a code..

radiator/coolent system, maybe got diff a bit. coz, Japan mostly cold. S'pore same like our.. too hot wheather!

usualy sgdm is rm6500 & jdm is rm7500.. wit rm1k diff, then can use it for upgrde ECU or pay for pomen fee lah.. sav a bit!

 

[Spoonz]

go for jdm la.....
my foreman said jdm got more hp compare to sgdm...
japan not like malaysia...building proton uk spec better than local one...
pity malaysian...always have to sacrifice....

 

[hydro]

fr my poor knowledge..

ek sgdm no digital acond [same like local]. speedo meter until 220km/h
ek JDM got it. but, speedo onli 180km/h

both wit black color dasboad. price diff is abt rm1000!

ECU & performance, i think should be a same. stil P2T OBD2a code..

radiator/coolent system, maybe got diff a bit. coz, Japan mostly cold. S'pore same like our.. too hot wheather!

usualy sgdm is rm6500 & jdm is rm7500.. wit rm1k diff, then can use it for upgrde ECU or pay for pomen fee lah.. sav a bit!

sgdm 6500 halfcut? eg h/c convet to ej... can? pomen say use all wiring and ecu ...

 

[edy7311]

sgdm 6500 halfcut? eg h/c convet to ej... can? pomen say use all wiring and ecu ...

eg6/9 hafkat, mostly rm6000! eg ECU easy to upgrde. just add chip.. for EK ECU, need to replace whole box!

if can get sgdm EK hafkat at cheaper price, better take it. EK, engine is new! mostly around '96-98 production year. eg '92-94 year!

last time, find FULLKAT '96 ek4 sgdm[m] rm8500 at kepong! sunruf, door, carpet, leather electric seat, ABS stereng.. all include. very pity, sgdm ek4 dun hav back screen wiper!