Want to Modify My Daihatsu Charade. Need advice and recommendation.

K2002

Junior Member
Senior Member
Aug 2, 2006
11
0
1,501
I need some advice/ recommendation on modify my charade. i am still a noobie.
Please advice

I have a Daihatsu Charade Aura 1.3L 16v.
All is original look and feel.
The only change is the Air-cond.

Is there any front bumber , side skirt, rear bumper or spoilers for this model?

Which spring is better. A soft one or hard one..cause the spring now seems to be so hard and create lots of sound.

I am using 15 inch rim now. What is the max rim inch for this model?

Do i need to lowered my car?

Do i need stabilizer for the engine section and my rear wheel section?

Currently is not very fuel efficience. I pump in around rm60 this car can run around 265 km then have to refill..around 20 cents ++ per km. Anyways to make my car run for 16 cent per km?

Budget around 5k

sound system I need some average specs will do.
budget around 1k+

regards
-K2002-

Bump:
 

brian84

Known Member
Senior Member
Jun 19, 2006
210
0
5,016
bro, ur heading for performance or comfort...??

there is a few model of front and rear bumper (gtti, deto, espri), side skirt (kancil, gtti, old saga).......simple 2 say, in malaysia, as long as u have money, u can even fit a lambor bumper as u wish........

abs/lower - soft for comfort, hard for performance.....if u can't choose out of it, then just get an adjustable, so u can adjust the hi/lo/soft/hard level by ur own......

rim max is 17/18, but have 2 custom / cut ur rear fender coz it will got up with the rim that size....normal ppl use 15" enof....

u can get any stabilizer bar from ultra racing now, they provide lots of bar for charade G100....

as for FC, i think ur engine is old enof for a overhaul.......else just swap another engine in.....
as HC-E should not be that high FC.....

with the 7k of budget, u can done almost the whole car as u like......happy modding bro....:wavey:
 

K2002

Junior Member
Senior Member
Thread starter
Aug 2, 2006
11
0
1,501
Thanks for your recommendation. I appreciate it. :)
 

Random Post Every 5 Minutes

This Door Silence Strip
This post is taken from Pocket Rocket(White CRZ with gold XXR). He deserves all the credits and I have
asked for permission.

This strip is to reduce wind noise and make better contact between the rubber door seal/lining to car body.
Hence better door closing sound. 3M double sided tape is provided. Just 'stick' n play.
________________________________________________________________________

Had some free time over this public holiday, got these fantastic rubber...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience