- Feb 2, 2009
- 116
- 0
- 1,516
Here is the STEP by STEP...bro how to used the things
D'Carbo Installations Manual:
For Carburetor's car:
1. Start the engine. Switch off the air-cond and the lamp.
2. Open the cover and filter.
3. Pour the D'Carbo content into the carburetor mouth. You will notice the engine sound changes.
4. If there are two mouths, pour the D'Carbo into the mouth that is sucking. The mouth is dirtier than the other.
5. Put back the cover and filter to the original place and let the cleaning process. Let the engine running for 10~15 minutes.
6. Then press the pedal slowly (don't press until the needle touches 'red zone' of the RPM)
7. You will notice the carbon is cleaned and thrown away through the exhaust tail. After several minutes, you will notice the engine sound becomes quiter and smoother.
For Fuel Injection's car:
1. Start the engine. Switch off the air-cond and the lamp.
2. Get the vacum hose at the Inlet Manifold. Normally it is connected to the vacum chamber.
3. Pull the vacum hose from the vacum chamber.
4. Pour the D'Carbo content into the hose. The vacum hose will automatically suck the content of D'Carbo.
5. Put back the vacum hose to the original place and let the cleaning process. Let the engine running for 10~15 minutes.
6. Then press the pedal slowly (don't press until the needle touches 'red zone' of the RPM)
7. You will notice the carbon is cleaned and thrown away through the exhaust tail. After several minutes, you will notice the engine sound becomes quiter and smoother.
for more clear view, you can watch this video bro..
http://www.youtube.com/watch?v=-Kl142wFIJk
http://www.youtube.com/watch?v=rE_ip1Y5aLY&feature=related
Last edited: