[WTS] Brembo Kit - UPDATES!!
UPDATED 10/10/2008 - 2.40PM
- Project Mu 326mm SCR-Pro Rotors Sold!!
- Kit price updated!
Hi guys,
Another set of custom Brembo 324mm kit for sale. Its on my E36. Will clear most 17" depending on your rim offset. Planning to sell the whole set with front left+right knuckle (complete assembly). It will fit E36/E46 model. The ABS will still function with this setup. Just plug and play. Brake spec/package are as follows;
1. Brembo calipers - piston size 44mm/38mm (similar to R34 GTR spec)
2. 324mm rotors cross drilled single piece with plenty of meat left
3. Brake pads (plenty of meat left as well)
4. Custom adapters
5. Left + right knuckle of a E36
Asking price is 3.5k. Pls call or sms/call me 012-4090107. PMs will not be entertained because I have limited access during office hours.
Pics Update
This is the pic on my 18' rims. Please note I took this picture from bottom-up so it will look a bit small. The original Brembo caliper was black but I powdercoat it to Brembo Monobloc Silver with M3 decal. For those of you who prefer the original Brembo stamp, you can do so but getting the decal from Sunway for RM10 and get your trusted paint shop to overlay on it before powder-coating. Then, you will have the BREMBO word again. Rest assure this is ORIGINAL Brembo and can tell by the trademark stamp behind the caliper once it's taken out. Thanks for viewing
UPDATED 10/10/2008 - 2.40PM
- Project Mu 326mm SCR-Pro Rotors Sold!!
- Kit price updated!
Hi guys,
Another set of custom Brembo 324mm kit for sale. Its on my E36. Will clear most 17" depending on your rim offset. Planning to sell the whole set with front left+right knuckle (complete assembly). It will fit E36/E46 model. The ABS will still function with this setup. Just plug and play. Brake spec/package are as follows;
1. Brembo calipers - piston size 44mm/38mm (similar to R34 GTR spec)
2. 324mm rotors cross drilled single piece with plenty of meat left
3. Brake pads (plenty of meat left as well)
4. Custom adapters
5. Left + right knuckle of a E36
Asking price is 3.5k. Pls call or sms/call me 012-4090107. PMs will not be entertained because I have limited access during office hours.
Pics Update
This is the pic on my 18' rims. Please note I took this picture from bottom-up so it will look a bit small. The original Brembo caliper was black but I powdercoat it to Brembo Monobloc Silver with M3 decal. For those of you who prefer the original Brembo stamp, you can do so but getting the decal from Sunway for RM10 and get your trusted paint shop to overlay on it before powder-coating. Then, you will have the BREMBO word again. Rest assure this is ORIGINAL Brembo and can tell by the trademark stamp behind the caliper once it's taken out. Thanks for viewing
Last edited:
