Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="vwmania" data-source="post: 1876036" data-attributes="member: 8882">tips about progresive webber carbTo help make the right choice for your future needsIn the past there have been questions and much miss information put out on the choice of a 32/36 DGEV carb or the 38 DGAS1) The Kits utilizing the 32/36 Progressives Weber are designed to provide the market with an economical performance carburetor conversion that while increasing Hp also improves drivability and fuel economy over the stock carburetor. The kits using the 32/36 progressive carburetor is the optimum carburetor for use as a replacement carburetor for a worn out or hard to maintain factory carb.2) When purchased in kit form, the Redline Weber kit with the 38mm DGAS carb will perform on a stock unmodified engine without any problems. This is not going to be an over carburetion situation.It will provide considerably more initial torque and acceleration but the top end performance will not be significantly improved over the 32/36 when used on a stock motor.3) The 38mm DGAS carb should be the only consideration if the engine is in the future or currently going to have any level of additional engine modification. Such as headers, free flowing exhaust, a cam, or rebuilt engine. Usually these motors will be improved over stock with oversize pistons and towing cam. The 38 will enhance the improvements of any of these items. The 6 cylinder engine applications are particularly enhanced by this application. In-fact on ALL JEEP and LAND CRUSER applications with any upgrades this is a mandatory choice. Other wise the progressive will require extensive re-calibration to work properly. 4) When using a 32/36 in the above situations will require additional calibration and rejetting to attain the desired performance and standard fuel economy. There is a jet kit available for just this reason. The jetting is required due to the performance enhancements of the additional modifications. Although the 32/36 does out perform the original, to receive the full benefit of your investment the 32/36 will require helpful re-calibration. The 38 DGAS is the optimum choice and has a larger fuel delivery system and the calibration to handle the broader range of improved performance and improves substantially your other product investments. 5) While the 32/36 progressive carb will improve your fuel economy on a stock motor over the OEM carb. The 38 Synchronous carb will not get less fuel economy than the OEM carb.RECAPThe 32/36 DGV progressive carburetor as used in any Redline Weber kit is pre-calibrated and set to run on most normal standard and stock engines and provide a performance and fuel economy improvement. If that engine has been upgraded or improved with other performance items there will be a need to recalibrate or rejet the carburetor in some situations. There is a performance jet kit just for the Jeep applications Pt No. 701-DGV.The 38 DGAS synchronous carburetor when supplied in kit form from Redline Weber is also pre-calibrated for use on stock or slightly modified motors and will not be over carbureted. It also provides the best starting point for engines that are ultimately going to be upgraded with additional performance Items with performance over fuel economy being the ultimate goal.</blockquote>

Verification

The Marketplace Latest

Perodua Alza convert new facelift body parts
- Started by jeff6126
- Exterior and Body
BMW E60 Msport Body Kit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda City 2014~19year Drive68 body kit
- Started by jeff6126
- Exterior and Body
Perodua Alza gear up body kit / spoiler
- Started by jeff6126
- Exterior and Body
Proton Saga Mix body kit
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer JS GTwing spoiler
- Started by jeff6126
- Exterior and Body
Honda Civic FD TypeR body kit
- Started by jeff6126
- Exterior and Body
Proton Satria GTi body kit / Evo front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F30 gts front bonnet hood with scoop
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

2nd tt session

any one care to come out tok cock n blow water?hehe...

WTA : Adjustable rear toe arm

hi guys, anybody know where to find this item? I want the left side since my altezza always have rear toe problem on the left side. the mechanic said that the due to my member frame is already 'lembik' , if he adjust...

Help!! car jerks at 6k rpm

Hello rotary gurus and sifus,

Need your opinion on this problem i have on my rx7 FC. The car cannot maintain its boost pressure, once it hit its cap (0.8) the boost needle slowly dwindles down, and when i shift into...

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

Perodua Alza convert new facelift body parts

BMW E60 Msport Body Kit

BMW F30 M3 mperformance front skirt lip

Honda City 2014~19year Drive68 body kit

Perodua Alza gear up body kit / spoiler

Proton Saga Mix body kit

Mitsubishi Lancer JS GTwing spoiler

Honda Civic FD TypeR body kit

Proton Satria GTi body kit / Evo front bonnet hood

BMW F30 gts front bonnet hood with scoop

Posts refresh every 5 minutes

Recent Posts

Performance Tire Prices(Pls Contribute The Price & Location to buy)

Tire Price list Zth

Paging for Hyundai Coupe owner, CCGT @ 28th May 2005

New GR Yaris Automatic & GR Supra Track Edition Now in Malaysia

2025 Volvo EX90 Wins World Luxury Car Award

Search

Online now

Enjoying Zerotohundred?