Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Ray" data-source="post: 485870" data-attributes="member: 1801">Anyone got this cable plug for my 4age small port. please PM me... my got low budget one! don have money to buy new TRD plug cable cost at RM400! :( Alvin! nice car you have!! heheheThis is some of my Engine Info... Third Generation 4AGE (89.5-91.6)The next generation engines were introduced in May 1989 and remained in production until June 1991. These engines effectively retained the heavier duty block but added a new head with smaller intake ports, hence the TVIS was discontinued. Some engines have silver cam covers with red lettering only (and so are called red tops), while others continued with black and red lettering. The easiest way to identify these engines is by the ribbing on the top surface of the intake manifold (earlier models have smooth tops) and an external oil drain from the head to the sump, located on the inlet side behind #4 inlet port. The sump is slightly different to earlier models.These engines all have oil cooled pistons and the ignition leads run underneath a cover between the cam covers. Power is increased to 100 kW and all engines are MAP sensored. I believe these engines all feature a knock sensor, located near the top of the block on the inlet side between #2 and #3 cylinders. This is the final naturally aspirated 16 valve variant produced.The 4AGZE has the same additions and utilises the twin coil distributor less ignition system, as it was only available in FWD AE 92 Levins and Truenos. Power increased to 120 kW and the supercharger has a smaller diameter pulley compared to the earlier version.</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Launch Control?

Ever tried pressing the brake hard with left foot and at the same time, pinning your throttle to metal to build the rev and boost before taking off?

I want to know how 'serious' will the damage be on the gearbox?

How to install new meter panel for wira

hi there, just wondering, how do you install new meter panel for wira coz i planned to buy a mivec meter panel to replace my old wira meter...

Altezza front lip

I'm just buying an Altezza, nice 99 model.

Anyway, I'm wondering where I can get the front lip as the car I'm buying doesn't have one. The OEM design lip, looks best.

Has anyone made a mould here already, or...