Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="tuned" data-source="post: 2210907" data-attributes="member: 15187">the 6A12 is smoother, power wise it shouldn't vary significantly from your stock 4G63...... about reliability, the 6A12 on the local V6 tends to have less problem compared to the 4G63...mainly because they are newer... the only issue u'll need to look at...is the automatic transmission which tends to shortlived prematurely... as for a JDM halfcut, yes they have manual....shouldn't be any problems provided u gotten urself a good halfcut...maintenance wise, you'll have to consider....maintaining a V6 will be a lil' pricier than your 4G63.....i.e. the timing belt kit costs 400+, the plugs costs 60 to 70 bucks each, engine oil has to be at least 5liters....and fuel consumption would be a lil' higher... anyhow, i'm not wrong, it would cost pretty much the same, either u get a local version or a JDM version which has better power figures....as labor costs are standard.....in short, if u really wanna do it...1. get a reliable and experienced workshop and get the overall cost quoted....2. get them to source u a reliable engine (local or halfcut)...or get them to help confirm its condition for u...3. get a reliable runner who can get ur ride approved with PUSPAKOM/JPJbeware of hidden cost though....there are sure to be some...</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Lancer CK convert project

Hi bros,
After many months & years of delay at last plan to do convert to my lancer. Any workshop or garage which u guys can recommend to do such work ? I dun mind paying abit more but I want a good job done. eg...

[WT Ask] About my Strange Boost Problem

to all sifu,
i set my GSR Turbo @ 1.2
so when i Full pedal , Turbo only Reach 1.2 for 1 Sec
After that automatic Dropped to 1.0 , 0.8 , 0.5 Slowly
Sems like the higher i Rev , the Boost drop faster
Normally , Turbo...

Check out his car

What car would the wheel designer of all the ADVAN wheels potter about in?

http://www.superstreetonline.com/featuredvehicles/130_0310_rx7/

Cheers