Inspira 2.0 CVT Bolt On Turbo

Waiora_ProTuner

500 RPM
Senior Member
Nov 29, 2006
619
221
1,543
Jatco CVT can withstand the torque...I believe it use the same CVT as in 2.4L Lancer (4B12)..
It's safe to say that it can handle 170hp with 230nm..around 0.2bar or 3 psi...LOL..

just need to control the temperature...bigger cooler maybe..
 

hon_cs

Known Member
Senior Member
Jan 23, 2004
251
43
3,028
Ipoh
Previous post stated boost for not more than 5 minutes, now posting less than a minute plus show off? If u meant bot is for show off, then u must still be living in a world shielded by a cover the size of a peanut, no offence to u mate but offence noted from your statement above though. There tons of bot out there and it's been donkey years since bot was introduced thus if u still can't figure out the purpose nor the benefit of bot by all means keep to your na and your inconstructive comments are unwelcomed here so no thank you.:smokin:
Owner is asking cvt bot. Not conventional auto/manual. No offend but do you own cvt car or inspira/lgt? If not don't simply quote my statement wrong. Your video is showing 1.8 manual. I don't want to argue about 5 min pull. A good reference is one round of cameron/genting drive would boost your car more than 5min on and off.
 

zack.my

Active Member
Jul 10, 2013
42
1
508
Kuala Lumpur
Maybe out off topic..i am inspira 1.8 m/t..
Think to put BOT..
Any sifu here suggest me..is it ok for me to put BOT ?
Cant pull more than 5min mean what?
As i know this thing already set for safety area boost presure.. 0.6bar.
Minimum enuf..so presure must be cant be more than 0.6 right?
let say i pull over 5min..let say 10 min.. What happen?
Sory noob user here..plis some body answer my question..
1 more thing any recomended other shop speedworks?
 
Last edited:

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
Maybe out off topic..i am inspira 1.8 m/t..
Think to put BOT..
Any sifu here suggest me..is it ok for me to put BOT ?
Cant pull more than 5min mean what?
As i know this thing already set for safety area boost presure.. 0.6bar.
Minimum enuf..so presure must be cant be more than 0.6 right?
let say i pull over 5min..let say 10 min.. What happen?
Sory noob user here..plis some body answer my question..
1 more thing any recomended other shop speedworks?



0.6 bar already in high range....safe for basic bot below 0.4bar
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
thanks for quick reply..
ok let say 0.4bar...
then cant stand more than 5min?
hahaha..
any inspira 1.8mt put BOT already? is it worth every buck on it?
Manual should be okay, more worried the power too much to handle for CVT gb....
 

zack.my

Active Member
Jul 10, 2013
42
1
508
Kuala Lumpur
Manual should be okay, more worried the power too much to handle for CVT gb....
should be okay..mean totaly ok right?..
i do some research mt gb on inspira can max 0.7 bar ..without melt their piston
but for more peace of mind and not too pressure on engine better put 0.6 bar..
and for more secure and less wear n tear can just put 0.4 only..it is true?

i am still waiting for real inspira 1.8 mt include BOT...
in malaysia just speedworks only provide this BOT installation?
another suggestion?:confused:
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
thanks for quick reply..
ok let say 0.4bar...
then cant stand more than 5min?
hahaha..
any inspira 1.8mt put BOT already? is it worth every buck on it?
its all depend on engine ignition+fuel tuning as well as radiator capacity and other cooling capacity
 

Random Post Every 5 Minutes

<img class="alignnone size-medium wp-image-31995" src="http://www.zerotohundred.com/wp-content/uploads/2012/06/871142-ducks-in-taizhou-china-600x450.jpg" alt="" width="600" height="450" />

“Why did the chicken cross the road?” has got to be one of the oldest jokes in the book, and is not much of a challenge since there is only one chicken involved. But what if one were to change the chicken to ducks and take it up a notch to, let’s say, 5000? Then you will get the same havoc of what a...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience