ECU...fuel flow...

  • '(00): currently testing temporary changes to the site and ad serving, sorry for any weirdness experienced, people! Please do send any feedback here: Contact us

12oY

Known Member
Senior Member

12oY

Known Member
Senior Member
Thread starter
Nov 9, 2004
422
0
3,016
kuantan
Visit site
for addition info for 4G15P......

Fuel Pressure With Vacuum Hose Disconnected 1.5 & 1.8 47-50 psi (330-350 kPa)
With Vacuum Hose Connected ~38 psi (~270 kPa
 

12oY

Known Member
Senior Member

12oY

Known Member
Senior Member
Thread starter
Nov 9, 2004
422
0
3,016
kuantan
Visit site
i have try.... by reduse the vacum of the fuel regulator hose bt adding a air valve... it work pretty well in low rpm but not in high rpm form 4600 to 6500 rpm... it kind like the engine jerking maybe of not enought fuel supply enought to the engine system....but if i incerase the vacume by close up abit the air valve it work better in high rpm but is not as good as b4 at low rpm......maybe i will post the pic soon...
 

InitialD

1,000 RPM
Senior Member

InitialD

1,000 RPM
Senior Member
Aug 27, 2004
1,300
93
3,148
Visit site
drexchan, I noticed on ur website ur proton has Angle Eyes. Is it DIY or was it part of the new spot lights that you installed to your car?

I am referring to this page

Where did u buy those fog lights? How much?
 

drexchan

2,000 RPM
Senior Member

drexchan

2,000 RPM
Senior Member
Nov 23, 2004
2,908
100
3,163
Bukit Jalil
drexchan.fotopic.net
I am aware that the angle eyes can be DIY'ed. But i got it as part of the lights. RM120 including installation. But i believe that most of you guys here are DIYers so it's better to get the lights and DIY the installation. The instruction and electrical diagram is on the packaging.
 

12oY

Known Member
Senior Member

12oY

Known Member
Senior Member
Thread starter
Nov 9, 2004
422
0
3,016
kuantan
Visit site
wah that cheap le ... i saw b4 got waja install.... dam cool .....