vteckiller

can install emanage with ignition harness..:)
no problem at all..for sure can...

with the regrind cams should be good..so u can get high rpm power.

would cost u rm1450 in total.
-emanage
-instalation
-ign harness
-dyno tuning
__________________all together in one package______________________

     

opp61

Bros

I go to GT Auto. Work is good and clean. Give me what I want. Got the emanage on my RB 25DET. Used to do 300km to one tank at 0.5 bar. now at 0.8 bar and hy range is somewhere around 380 to 400 km. Full Torque is now in very low at around 2.8 to 3K rpm.

As they say, not all good things come cheap.

     

vteckiller

emanage will not solve your problem.Emanage will not eliminate rpm cut.
u would need ecu like microtech to solve this problem.

or can buy a used microtech lt4 if u are in a tight budget..or new one which will cost u RM3000 plus install and tune..then your rpm cut and speed cut wont be there and u also can eliminate your airflow sensor if u have one..

     

del

In tat case do u have a use It4 used microtech n plus install n tuning.....how much ha bro. thankz for di advise

     

vteckiller

well i dont have a used unit at the momment.
maybe u can try search in marketplace in the forum.
will charge u RM800 for install and full dyno tuning.
if u get a used one.
the market price of a used one would be max rm1200

new would cost u rm3000 all in all..

     

toriton

thanks bro.one more question.do i need to install adjustable cam pulley for better setting for my cam shaft?

     

GSHOCK1

DEar Mr vteckiller/or any vtec maniac

My car had a problem right now...need your edvise why my check enjine still 'menyala' after change map sensor ( detect from blinking enjine light -error is map sensor )

is't cause of wiring vafc/compter box/ or anything else


hope to get your reply asap


tq

     

Mitevo7

Hi all , currently running a n16 with QG16DE and auto tranny . Just dumped in full exhaust-system , Open Pod , Iridium Plugs ... I expect to gain 15 bhp while combo all that i mod with a Emanage ... Is that possible ?

One more question , can i install ignition harness along with Emanage into my n16 ?

     

vteckiller

how come u got cams but dont have cam pulley..?funny!//\\
then whoever installed the cams,how did he dial the cams in?
hmmm interesting...
well i guess better use la.

     

vteckiller

i guess it could be possible.

     

vteckiller

check your afc setting..maybe wrong airflow setting or some thing like that..
check it out..

     

toriton

no.what i mean is now i'm using standard cam pulley.the stock one.can not retard or advance

     

Mitevo7

Bro did u quote the wrong person ?? I would like to know is there anything i should beware of when installing the Emanage ?